My Quote Request
No products added yet
5305-00-285-5700
20 Products
105124-203
SCREW,MACHINE
NSN, MFG P/N
5305002855700
NSN
5305-00-285-5700
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: NICKEL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
23-00093-054
SCREW,MACHINE
NSN, MFG P/N
5305002855700
NSN
5305-00-285-5700
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: NICKEL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
39164-30DN
SCREW,MACHINE
NSN, MFG P/N
5305002855700
NSN
5305-00-285-5700
MFG
L-3 COMMUNICATIONS CINCINNATI ELECTRONICS CORPORATION
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: NICKEL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
A440-4BBN
SCREW,MACHINE
NSN, MFG P/N
5305002855700
NSN
5305-00-285-5700
MFG
ALL CRAFT SCREW AND HARDWARE CO INC
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: NICKEL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
0453-328
SCREW,MACHINE
NSN, MFG P/N
5305002855704
NSN
5305-00-285-5704
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.399 INCHES NOMINAL
HEAD HEIGHT: 0.114 INCHES NOMINAL
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
104-104P75
SCREW,MACHINE
NSN, MFG P/N
5305002855704
NSN
5305-00-285-5704
MFG
SAFETRAN SYSTEMS CO SUB OF CCI CORP
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.399 INCHES NOMINAL
HEAD HEIGHT: 0.114 INCHES NOMINAL
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FFS92TYPE1STYLE4S
SCREW,MACHINE
NSN, MFG P/N
5305002855717
NSN
5305-00-285-5717
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
Q5523M04-05
SCREW,MACHINE
NSN, MFG P/N
5305002855717
NSN
5305-00-285-5717
MFG
GE AVIATION SYSTEMS LLC
Description
FASTENER LENGTH: 0.281 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.069 INCHES MINIMUM AND 0.079 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.262 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN507B1032R14
SCREW,MACHINE
NSN, MFG P/N
5305002855721
NSN
5305-00-285-5721
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN507B1032R14
FASTENER LENGTH: 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: OXIDE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.792 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN115413
SCREW,MACHINE
NSN, MFG P/N
5305002855732
NSN
5305-00-285-5732
MFG
SOCIETY OF AUTOMOTIVE ENGINEERS INC
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.125 INCHES NOMINAL
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.572 INCHES MINIMUM AND 0.622 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN115413
SCREW,MACHINE
NSN, MFG P/N
5305002855732
NSN
5305-00-285-5732
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.125 INCHES NOMINAL
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.572 INCHES MINIMUM AND 0.622 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
S2113-65
SCREW,MACHINE
NSN, MFG P/N
5305002855737
NSN
5305-00-285-5737
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DBA LAND & SELF PROTECTION SYSTEM DIVISION DIV LAND & SELF PROTECTION SYSTEMS DIV
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.378 INCHES MINIMUM AND 0.399 INCHES MAXIMUM
HEAD HEIGHT: 0.102 INCHES MINIMUM AND 0.114 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW SURFACE TREATMENT: CADMIUM
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
AN115883
SCREW,MACHINE
NSN, MFG P/N
5305002855768
NSN
5305-00-285-5768
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN115883
FASTENER LENGTH: 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM
HEAD HEIGHT: 0.256 INCHES MINIMUM AND 0.276 INCHES MAXIMUM
HEAD HOLE CONFIGURATION STYLE: C8 ROUND
HEAD STYLE: A38 FLAT CHAMFER
HOLE DIAMETER: 0.070 INCHES NOMINAL
HOLE QUANTITY: 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.740 INCHES MINIMUM AND 0.820 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
13967-1
SCREW,MACHINE
NSN, MFG P/N
5305002855770
NSN
5305-00-285-5770
MFG
AEROSONIC CORPORATION
Description
FASTENER LENGTH: 0.156 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.156 INCHES MINIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNF
Related Searches:
X24-27
SCREW,MACHINE
NSN, MFG P/N
5305002855770
NSN
5305-00-285-5770
MFG
HORIZON AEROSPACE LLC DBA MAGNETICS DIVISION
Description
FASTENER LENGTH: 0.156 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B10 SLOT
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.156 INCHES MINIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNF
Related Searches:
231-216SS
SCREW,MACHINE
NSN, MFG P/N
5305002855778
NSN
5305-00-285-5778
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500D2-16
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.964 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
231-216SS
SCREW,MACHINE
NSN, MFG P/N
5305002855778
NSN
5305-00-285-5778
MFG
HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500D2-16
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.964 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
340-120-0072
SCREW,MACHINE
NSN, MFG P/N
5305002855778
NSN
5305-00-285-5778
MFG
VIBRO-METER INC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500D2-16
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.964 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
530867
SCREW,MACHINE
NSN, MFG P/N
5305002855778
NSN
5305-00-285-5778
MFG
FL AEROSPACE CORP JANITROL AERO DIV/GENERAL DESIGN
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500D2-16
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.964 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN500D2-16
SCREW,MACHINE
NSN, MFG P/N
5305002855778
NSN
5305-00-285-5778
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN500D2-16
FASTENER LENGTH: 1.000 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS92TYPE1STYLE4S
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 4S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.964 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
