My Quote Request
No products added yet
5305-01-362-4400
20 Products
41X1363
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013624400
NSN
5305-01-362-4400
MFG
AXLETECH INTERNATIONAL INC.
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON 2 MRAP VARIANTS AND 2 OTHER WEAPON SYSTEMS.
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SCREW
Related Searches:
41X1363
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013624400
NSN
5305-01-362-4400
MFG
MERITOR HEAVY VEHICLE SYSTEMS LLC
Description
III END ITEM IDENTIFICATION: MRAP - COMMON NSN - USED ON 2 MRAP VARIANTS AND 2 OTHER WEAPON SYSTEMS.
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SCREW
Related Searches:
524-6603688-VHBA-97
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013624450
NSN
5305-01-362-4450
524-6603688-VHBA-97
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013624450
NSN
5305-01-362-4450
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL UNS K03104 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: CHROMATE OR CADMIUM LOCKING FEATURE ALUMINUM OR ZINC OR CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE LOCKING FEATURE MIL-C-83488 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-87115 CL 3 MIL SPEC 2ND TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.125 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNRC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
5959303-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013624450
NSN
5305-01-362-4450
MFG
ELECTRIC BOAT CORPORATION
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL UNS K03104 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: CHROMATE OR CADMIUM LOCKING FEATURE ALUMINUM OR ZINC OR CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE LOCKING FEATURE MIL-C-83488 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-87115 CL 3 MIL SPEC 2ND TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.125 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNRC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
803-5959303-X-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013624450
NSN
5305-01-362-4450
803-5959303-X-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013624450
NSN
5305-01-362-4450
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL UNS K03104 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: CHROMATE OR CADMIUM LOCKING FEATURE ALUMINUM OR ZINC OR CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 FED SPEC SINGLE TREATMENT RESPONSE LOCKING FEATURE MIL-C-83488 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-C-87115 CL 3 MIL SPEC 2ND TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.125 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNRC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
12540C18
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013624451
NSN
5305-01-362-4451
MFG
CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION DIV EPD USE CAGE CODE 0UBG9 FOR CATALOGING.
Description
FASTENER LENGTH: 3.500 INCHES NOMINAL
HEAD HEIGHT: 0.230 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP 4142 OR STEEL COMP 4145 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A 193 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES NOMINAL
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.560 INCHES NOMINAL
Related Searches:
JCM-14271-005
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013624452
NSN
5305-01-362-4452
MFG
STRIKE WEAPONS AND UNMANNED AVIATION
Description
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: NICKEL ALLOY K-500 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286 CLA FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SPECIAL FEATURES: HOT FINISHED AND AGE HARDENED
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
Related Searches:
JCM-14271-003
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013624453
NSN
5305-01-362-4453
MFG
STRIKE WEAPONS AND UNMANNED AVIATION
Description
FASTENER LENGTH: 3.156 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: NICKEL ALLOY K-500 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286 CLA FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIAL FEATURES: HOT FINISHED AND AGE HARDENED
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 3.156 INCHES MINIMUM AND 3.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
Related Searches:
JCM-14271-002
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013624454
NSN
5305-01-362-4454
MFG
STRIKE WEAPONS AND UNMANNED AVIATION
Description
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HEAD HEIGHT: 0.302 INCHES MINIMUM AND 0.323 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MATERIAL: NICKEL ALLOY K-500 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-286 CLA FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIAL FEATURES: HOT FINISHED AND AGE HARDENED
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.736 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
Related Searches:
LD111-004-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
MFG
SONIC INDUSTRIES INC.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.751 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.516 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.751 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.516 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.751 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.516 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.751 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.516 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.751 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.516 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.751 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.516 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.751 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.516 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
LD111-0047-0620
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624456
NSN
5305-01-362-4456
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.751 INCHES MINIMUM AND 1.781 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.250 INCHES NOMINAL
HEAD DIAMETER: 0.510 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP XM-13 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.516 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1581C6H20
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013624457
NSN
5305-01-362-4457
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.829 INCHES MINIMUM AND 1.859 INCHES MAXIMUM
GRIP DIAMETER: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HEAD DIAMETER: 0.515 INCHES MINIMUM AND 0.566 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1581 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OR CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-36 FED SPEC 1ST TREATMENT RESPONSE OR QQ-P-416 TY2 CL2 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.594 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
CA29040-02-2-4HS
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013624458
NSN
5305-01-362-4458
CA29040-02-2-4HS
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013624458
NSN
5305-01-362-4458
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
FASTENER LENGTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
HEAD DIAMETER: 0.125 INCHES MINIMUM AND 0.155 INCHES MAXIMUM
HEAD HEIGHT: 0.320 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
HEAD STYLE: C44 FILLISTER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L SPRING STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS
NOMINAL THREAD DIAMETER: 0.086 INCHES
SURFACE TREATMENT: PASSIVATE SPRING PASSIVATE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.078 INCHES MINIMUM AND 0.108 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.078 INCHES NOMINAL
~1: X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL COMP 304 OR STEEL COMP 304L STAND-OFF STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303 PLUS X OR STEEL COMP 303SE OR STEEL COMP 303CU OR STEEL COMP 303MA OR STEEL
~2: COMP 304 OR STEEL COMP 304L FASTENER
Related Searches:
171549H01
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305013624459
NSN
5305-01-362-4459
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION
Description
FASTENER LENGTH: 0.355 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
HEAD DIAMETER: 0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAD HEIGHT: 0.100 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: ALUMINUM ALLOY 7075 STAND-OFF STEEL COMP 302 FASTENER
MATERIAL ACCOMMODATED THICKNESS: 0.049 INCHES MINIMUM AND 0.059 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR AMS 4122 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF ASTM A581 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5636 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
NOMINAL THREAD DIAMETER: 0.132 INCHES
SURFACE TREATMENT: CHROMATE OR ANODIZE STAND-OFF PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE STAND-OFF QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
