My Quote Request
No products added yet
5305-00-001-8153
20 Products
9407529
SCREW,MACHINE
NSN, MFG P/N
5305000018153
NSN
5305-00-001-8153
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.249 INCHES MINIMUM AND 0.263 INCHES MAXIMUM
HEAD HEIGHT: 0.064 INCHES MINIMUM AND 0.071 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.125 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1045 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.450 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FF-S-92B
SCREW,MACHINE
NSN, MFG P/N
5305000018153
NSN
5305-00-001-8153
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.249 INCHES MINIMUM AND 0.263 INCHES MAXIMUM
HEAD HEIGHT: 0.064 INCHES MINIMUM AND 0.071 INCHES MAXIMUM
HEAD STYLE: A20 BINDING
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
NOMINAL THREAD DIAMETER: 0.125 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92B
SCREW MATERIAL: STEEL COMP 1010 OR STEEL COMP 1045 OR STEEL COMP 1013 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.450 INCHES MINIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
ABS20642-4F12
SCREW,MACHINE
NSN, MFG P/N
5305000018154
NSN
5305-00-001-8154
MFG
PATTONAIR USA INC UNISEAL DIV
Description
FASTENER LENGTH: 1.065 INCHES NOMINAL
HEAD DIAMETER: 0.606 INCHES NOMINAL
HEAD HEIGHT: 0.100 INCHES NOMINAL
HEAD STYLE: A40 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: B5 TORQUE SET
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SPECIAL FEATURES: UNDER CUT IS UNDER CUT FOR PLASTIC WASHER AND O RING FOF WATER TIGHT SEAL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
763951
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000018162
NSN
5305-00-001-8162
MFG
WHITEHEAD ALENIA SISTEMI SUBACQUEI S PA
Description
COUNTERSINK ANGLE: 82.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: NICKEL ALLOY 400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.155 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM
Related Searches:
77C712412P060
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000018162
NSN
5305-00-001-8162
MFG
ALLMETAL SCREW PRODUCTS CORP DBA ALL METAL SCREW PRODUCTS
Description
COUNTERSINK ANGLE: 82.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: NICKEL ALLOY 400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.155 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM
Related Searches:
77C712412P060
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000018162
NSN
5305-00-001-8162
MFG
LOCKHEED MARTIN CORPORATION DBA MS2 DIV MS2 RADAR SYSTEMS
Description
COUNTERSINK ANGLE: 82.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: NICKEL ALLOY 400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.155 INCHES MINIMUM AND 0.248 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.125 INCHES MINIMUM AND 0.127 INCHES MAXIMUM
Related Searches:
77C712414P132
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000018163
NSN
5305-00-001-8163
MFG
LOCKHEED MARTIN CORPORATION DBA MS2 DIV MS2 RADAR SYSTEMS
Description
FASTENER LENGTH: 2.470 INCHES MINIMUM AND 2.530 INCHES MAXIMUM
HEAD DIAMETER: 0.562 INCHES NOMINAL
HEAD HEIGHT: 0.368 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: NICKEL ALLOY 400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CLASS A FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.312 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
Related Searches:
1611202PC13
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000018176
NSN
5305-00-001-8176
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 1611202PC13
FASTENER LENGTH: 0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
HEAD DIAMETER: 0.361 INCHES MAXIMUM
HEAD HEIGHT: 0.101 INCHES MAXIMUM
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MANUFACTURERS CODE: 10001
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4042 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: ZINC AND PHOSPHATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325 TYPE 3 CLASS 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.526 INCHES MINIMUM AND 0.641 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
1611202PC16
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000018177
NSN
5305-00-001-8177
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
DESIGN CONTROL REFERENCE: 1611202PC16
FASTENER LENGTH: 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
HEAD DIAMETER: 0.361 INCHES MAXIMUM
HEAD HEIGHT: 0.101 INCHES MAXIMUM
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MANUFACTURERS CODE: 10001
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4042 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-Z-325,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.776 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
3MA334CFA15
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018181
NSN
5305-00-001-8181
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.641 INCHES MINIMUM AND 1.688 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334CFA15
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018181
NSN
5305-00-001-8181
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.641 INCHES MINIMUM AND 1.688 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334CFA15
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018181
NSN
5305-00-001-8181
MFG
REED AND PRINCE MFG CO
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.641 INCHES MINIMUM AND 1.688 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334CFA15
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018181
NSN
5305-00-001-8181
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.641 INCHES MINIMUM AND 1.688 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334CFA15
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018181
NSN
5305-00-001-8181
MFG
NEWPORT AERONAUTICAL SALES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.641 INCHES MINIMUM AND 1.688 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MFR334CFA15
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018181
NSN
5305-00-001-8181
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.641 INCHES MINIMUM AND 1.688 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334CFA16
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018182
NSN
5305-00-001-8182
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.765 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334FA16
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018182
NSN
5305-00-001-8182
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.765 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334FA16
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018182
NSN
5305-00-001-8182
MFG
NEWPORT AERONAUTICAL SALES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.765 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334FA16
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018182
NSN
5305-00-001-8182
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.765 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
3MA334FA16
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305000018182
NSN
5305-00-001-8182
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.765 INCHES MINIMUM AND 1.812 INCHES MAXIMUM
GRIP DIAMETER: 0.2483 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH: 1.302 INCHES MINIMUM AND 1.322 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.497 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL PAINT HEAD PAINT GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE OVERALL P.S.13421,FSCM 76301 MFR REF 2ND TREATMENT RESPONSE HEAD P.S.13421,FSCM 76301 MFR REF 3RD TREATMENT RESPONSE GRIP
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.443 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
