My Quote Request
No products added yet
5305-00-016-7125
20 Products
110786-006
SCREW,MACHINE
NSN, MFG P/N
5305000167125
NSN
5305-00-016-7125
MFG
HARRIS CORPORATION DBA GOVERNMENT COMMUNICATIONS SYSTEMS DIVISION DIV GOVERNMENT COMMUNICATIONS SYSTEMS DIVISION
Description
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
FEATURES PROVIDED: O RING
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.238 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
III END ITEM IDENTIFICATION: W/S:HELICOPTER, SEARCH AND RESCUE, HH-60H; DECK MACHINERY; HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; HELICOPTER, ADVANCE ATTACK, AH-1W; HELICOPTER, CARRIER BASED ASW, SH-60F; AIRBORNE MINE COUNTER MEASURE SYSTEMS; TOWED ARRAY HANDLING EQUIPMENT;
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.481 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: HELICOPTER, MH-53E; SURFACE TORPEDO TUBES & ORDALTS; LOS ANGELES CLASS SSN (688)
Related Searches:
164571
SCREW,TAPPING
NSN, MFG P/N
5305000164571
NSN
5305-00-016-4571
MFG
GENERAL MOTORS CORP
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A12 DOG TYPE (TYPE B OR C)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
164571
SCREW,TAPPING
NSN, MFG P/N
5305000164571
NSN
5305-00-016-4571
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.162 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A12 DOG TYPE (TYPE B OR C)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
164676
SCREW,TAPPING
NSN, MFG P/N
5305000164676
NSN
5305-00-016-4676
MFG
GENERAL MOTORS CORP
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.594 INCHES MINIMUM AND 0.615 INCHES MAXIMUM
HEAD HEIGHT: 0.203 INCHES MINIMUM AND 0.218 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.312 INCHES
NONMACHINE THREAD STYLE: A12 DOG TYPE (TYPE B OR C)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
3164676
SCREW,TAPPING
NSN, MFG P/N
5305000164676
NSN
5305-00-016-4676
MFG
ARMY UNITED STATES DEPARTMENT OF THE DBA ROCK ISLAND ARSENAL
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.594 INCHES MINIMUM AND 0.615 INCHES MAXIMUM
HEAD HEIGHT: 0.203 INCHES MINIMUM AND 0.218 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.312 INCHES
NONMACHINE THREAD STYLE: A12 DOG TYPE (TYPE B OR C)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 2,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
166327
SCREW,TAPPING
NSN, MFG P/N
5305000166327
NSN
5305-00-016-6327
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.000 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A1 NARROW FLUTE (TYPE E) OR A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
MS24627-38
SCREW,TAPPING
NSN, MFG P/N
5305000166327
NSN
5305-00-016-6327
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.000 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A1 NARROW FLUTE (TYPE E) OR A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
MS24627-38
SCREW,TAPPING
NSN, MFG P/N
5305000166327
NSN
5305-00-016-6327
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.000 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.164 INCHES
NONMACHINE THREAD STYLE: A1 NARROW FLUTE (TYPE E) OR A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
MS24627-46
SCREW,TAPPING
NSN, MFG P/N
5305000166330
NSN
5305-00-016-6330
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.375 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD HEIGHT: 0.068 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A6 THRU SLOT (TYPE 6) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
MS24627-46
SCREW,TAPPING
NSN, MFG P/N
5305000166330
NSN
5305-00-016-6330
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.375 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD HEIGHT: 0.068 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A6 THRU SLOT (TYPE 6) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
NASM24627
SCREW,TAPPING
NSN, MFG P/N
5305000166330
NSN
5305-00-016-6330
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.375 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD HEIGHT: 0.068 INCHES MINIMUM AND 0.081 INCHES MAXIMUM
HEAD STYLE: C51 FLAT COUNTERSUNK UNDERCUT
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.190 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A6 THRU SLOT (TYPE 6) OR A4 WIDE FLUTE (TYPE T)
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
Related Searches:
166778
SCREW,TAPPING
NSN, MFG P/N
5305000166778
NSN
5305-00-016-6778
MFG
GENERAL MOTORS CORP
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
166778
SCREW,TAPPING
NSN, MFG P/N
5305000166778
NSN
5305-00-016-6778
MFG
ARMY WEAPONS COMMAND ATTN AMSWE-REE-S
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
166778
SCREW,TAPPING
NSN, MFG P/N
5305000166778
NSN
5305-00-016-6778
MFG
DIAMOND REO TRUCK CO
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
27P1011
SCREW,TAPPING
NSN, MFG P/N
5305000166778
NSN
5305-00-016-6778
MFG
LOCKWOOD CORP
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
955618
SCREW,TAPPING
NSN, MFG P/N
5305000166778
NSN
5305-00-016-6778
MFG
SASCO INC CANADIAN DIV
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.443 INCHES MINIMUM AND 0.472 INCHES MAXIMUM
HEAD HEIGHT: 0.160 INCHES MINIMUM AND 0.175 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D)
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
Related Searches:
AN505B3-6
SCREW,MACHINE
NSN, MFG P/N
5305000166841
NSN
5305-00-016-6841
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN505B3-6
FASTENER LENGTH: 0.344 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD DIAMETER: 0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.099 INCHES
SCREW MATERIAL: COPPER ALLOY
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 48
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NK510-2-6
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000166902
NSN
5305-00-016-6902
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: NK510-2-6
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH OR STRIP THREADS
MANUFACTURERS CODE: 26233
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 64
THREAD SERIES DESIGNATOR: UNF
Related Searches:
HT04R40S09
SCREW,MACHINE
NSN, MFG P/N
5305000167125
NSN
5305-00-016-7125
MFG
PENTACON AEROSPACE GROUP INC
Description
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
FEATURES PROVIDED: O RING
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.238 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
III END ITEM IDENTIFICATION: W/S:HELICOPTER, SEARCH AND RESCUE, HH-60H; DECK MACHINERY; HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; HELICOPTER, ADVANCE ATTACK, AH-1W; HELICOPTER, CARRIER BASED ASW, SH-60F; AIRBORNE MINE COUNTER MEASURE SYSTEMS; TOWED ARRAY HANDLING EQUIPMENT;
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.481 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: HELICOPTER, MH-53E; SURFACE TORPEDO TUBES & ORDALTS; LOS ANGELES CLASS SSN (688)
Related Searches:
HT04R40S09
SCREW,MACHINE
NSN, MFG P/N
5305000167125
NSN
5305-00-016-7125
MFG
ANIXTER INC. DBA ANIXTER
Description
FASTENER LENGTH: 0.531 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
FEATURES PROVIDED: O RING
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.238 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A44 WATERTIGHT
III END ITEM IDENTIFICATION: W/S:HELICOPTER, SEARCH AND RESCUE, HH-60H; DECK MACHINERY; HELICOPTER, USCG SEARCH AND RESCUE, HH-60J; HELICOPTER, ADVANCE ATTACK, AH-1W; HELICOPTER, CARRIER BASED ASW, SH-60F; AIRBORNE MINE COUNTER MEASURE SYSTEMS; TOWED ARRAY HANDLING EQUIPMENT;
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 304 OR STEEL COMP 305
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.481 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: HELICOPTER, MH-53E; SURFACE TORPEDO TUBES & ORDALTS; LOS ANGELES CLASS SSN (688)
