My Quote Request
No products added yet
5305-00-061-7974
20 Products
MS24649-57
SCREW,TAPPING
NSN, MFG P/N
5305000617974
NSN
5305-00-061-7974
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS24649-57
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NONDEFINITIVE SPEC/STD DATA: DFGT TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.250 INCHES
NONMACHINE THREAD STYLE: A2 THRU SLOT (TYPE D) OR A3 DOUBLE FLUTE (TYPE F) OR A4 WIDE FLUTE (TYPE T) OR A6 THRU SLOT (TYPE 6)
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OR CHROMATE OVERALL
Related Searches:
664262
SCREW,MACHINE
NSN, MFG P/N
5305000617992
NSN
5305-00-061-7992
MFG
NORTHROP GRUMMAN GUIDANCE AND ELECTRONICS COMPANY INC. DBA NAVIGATION SYSTEMS DIVISION DIV NAVIGATION SYSTEMS DIVISION
Description
DESIGN CONTROL REFERENCE: 664262
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD DIAMETER: 0.124 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD HEIGHT: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 06481
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: NICKEL ALLOY
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS21316-15
THUMBSCREW
NSN, MFG P/N
5305000618148
NSN
5305-00-061-8148
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS21316-15
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
HEAD HEIGHT: 0.350 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
HEAD STYLE: C79 THUMB NO. 3
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F19 FLAT
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.320 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
Related Searches:
MS21316-15
THUMBSCREW
NSN, MFG P/N
5305000618148
NSN
5305-00-061-8148
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS21316-15
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
HEAD HEIGHT: 0.350 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
HEAD STYLE: C79 THUMB NO. 3
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F19 FLAT
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.657 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.320 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
Related Searches:
FFS85TYPEIISTYLE10P
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000618206
NSN
5305-00-061-8206
FFS85TYPEIISTYLE10P
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000618206
NSN
5305-00-061-8206
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SURFACE TREATMENT
FASTENER LENGTH: 0.625 INCHES NOMINAL
HARDNESS RATING: 100.0 ROCKWELL B MAXIMUM OVERALL
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 69000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85TYPEIISTYLE10P
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35292-31
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
Related Searches:
MS35292-31
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000618206
NSN
5305-00-061-8206
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY SURFACE TREATMENT
FASTENER LENGTH: 0.625 INCHES NOMINAL
HARDNESS RATING: 100.0 ROCKWELL B MAXIMUM OVERALL
HEAD HEIGHT: 0.195 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 2 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 69000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS85TYPEIISTYLE10P
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS35292-31
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
Related Searches:
NK509C-616R15
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000618226
NSN
5305-00-061-8226
MFG
NYLOK FASTENER CORP
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: NK509C616R15
FASTENER LENGTH: 1.031 INCHES NOMINAL
HEAD DIAMETER: 0.742 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH OR PELLET OR PELLET THREADS
MANUFACTURERS CODE: 17910
MATERIAL: STEEL CORROSION RESISTING OVERALL
MINIMUM TENSILE STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.719 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NK509C616R15
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000618226
NSN
5305-00-061-8226
MFG
NYLOK CORPORATION DBA AEROSPACE NYLOK
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: NK509C616R15
FASTENER LENGTH: 1.031 INCHES NOMINAL
HEAD DIAMETER: 0.742 INCHES MINIMUM AND 0.762 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH OR PELLET OR PELLET THREADS
MANUFACTURERS CODE: 17910
MATERIAL: STEEL CORROSION RESISTING OVERALL
MINIMUM TENSILE STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.719 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NK525-10R18
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000618231
NSN
5305-00-061-8231
MFG
NYLOK CORPORATION DBA AEROSPACE NYLOK
Description
DESIGN CONTROL REFERENCE: NK525-10R18
EXTENDED WASHER DIAMETER: 0.437 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.025 INCHES NOMINAL
FASTENER LENGTH: 1.125 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.094 INCHES NOMINAL
HEAD STYLE: C38 ROUND EXTENDED WASHER
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH OR STRIP THREADS
MANUFACTURERS CODE: 17910
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.407 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
112-1055-066
SCREW,MACHINE
NSN, MFG P/N
5305000618243
NSN
5305-00-061-8243
MFG
BOEING COMPANY THE DBA BOEING DIV DEFENSE SPACE & SECURITY - NETWORK & SPACE SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD DIAMETER: 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.855 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
965813-445C
SCREW,MACHINE
NSN, MFG P/N
5305000618243
NSN
5305-00-061-8243
MFG
RAYTHEON COMPANY
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD DIAMETER: 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.855 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
ANSM24693
SCREW,MACHINE
NSN, MFG P/N
5305000618243
NSN
5305-00-061-8243
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD DIAMETER: 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.855 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS24693-C288
SCREW,MACHINE
NSN, MFG P/N
5305000618243
NSN
5305-00-061-8243
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 3.000 INCHES NOMINAL
HEAD DIAMETER: 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 3C STYLE
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.855 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
0453-092
SCREW,MACHINE
NSN, MFG P/N
5305000618393
NSN
5305-00-061-8393
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN MS2
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD DIAMETER: 0.186 INCHES NOMINAL
HEAD HEIGHT: 0.055 INCHES NOMINAL
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.099 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 48
THREAD SERIES DESIGNATOR: UNC
Related Searches:
1-4-20X3-8
SCREW,MACHINE
NSN, MFG P/N
5305000618397
NSN
5305-00-061-8397
MFG
AJAX MAGNETHERMEC CORP LECTRODRYER DIV
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD DIAMETER: 0.492 INCHES NOMINAL
HEAD HEIGHT: 0.142 INCHES NOMINAL
HEAD STYLE: A38 FLAT CHAMFER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS600-13P
SCREW,MACHINE
NSN, MFG P/N
5305000618425
NSN
5305-00-061-8425
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.781 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS600 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.762 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
P343-0431-000
SCREW,MACHINE
NSN, MFG P/N
5305000618425
NSN
5305-00-061-8425
MFG
ALLIED PRODUCTS CORP PHEOLL MFG CO DIV
Description
FASTENER LENGTH: 0.781 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A23 PAN
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 8630
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS600 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.762 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
LK1081-5B12
SETSCREW
NSN, MFG P/N
5305000618427
NSN
5305-00-061-8427
MFG
TORKON FASTENER CORP
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET OR STRIP THREADS
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM
Related Searches:
NAS1081-5B12
SETSCREW
NSN, MFG P/N
5305000618427
NSN
5305-00-061-8427
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.750 INCHES NOMINAL
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET OR STRIP THREADS
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT STYLE: F16 CONE
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.158 INCHES MAXIMUM
Related Searches:
14895-2
SCREW,MACHINE
NSN, MFG P/N
5305000618915
NSN
5305-00-061-8915
MFG
TYCO ELECTRONICS CORPORATION DBA CII TECHNOLOGIES HARTMAN PRODUCTS
Description
DESIGN CONTROL REFERENCE: 14895-2
FASTENER LENGTH: 0.376 INCHES NOMINAL
HEAD HEIGHT: 0.047 INCHES NOMINAL
HEAD STYLE: A1 HEXAGON
MANUFACTURERS CODE: 74063
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW SURFACE TREATMENT: PASSIVATE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.125 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.125 INCHES NOMINAL
