My Quote Request
No products added yet
5305-01-051-4324
20 Products
BACS12GM3-16
SCREW,MACHINE
NSN, MFG P/N
5305010514324
NSN
5305-01-051-4324
MFG
THE BOEING COMPANY DBA BOEING
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: BACS12GM3-16
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.332 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81205
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: EXTENDED POINT ON THREADED END 57 TO 63 DEGREES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.827 INCHES MINIMUM AND 0.920 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1190E04P31
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010512717
NSN
5305-01-051-2717
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1190 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.107 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1190E04P3L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010512717
NSN
5305-01-051-2717
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.157 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: STRIP THREADS
MATERIAL: IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1190 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.107 INCHES MINIMUM AND 0.188 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
CL13SS
SCREW,SHOULDER
NSN, MFG P/N
5305010512722
NSN
5305-01-051-2722
MFG
CARR LANE MANUFACTURING COMPANY
Description
DESIGN CONTROL REFERENCE: CL13SS
FASTENER LENGTH: 0.875 INCHES NOMINAL
HEAD DIAMETER: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.188 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 99862
MATERIAL: STEEL COMP 1213 OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHOULDER DIAMETER: 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.500 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: OXIDE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
Related Searches:
164B8248P1
SCREW,HEADED
NSN, MFG P/N
5305010512936
NSN
5305-01-051-2936
MFG
BAE SYSTEMS CONTROLS INC.
Description
DESIGN CONTROL REFERENCE: 164B8248P1
GENERAL CHARACTERISTICS ITEM DESCRIPTION: CRES ASTM A582 TY 303 COND A, 8-32UNC-2A THD, 0.600 IN. MIN AND 0.610 IN. MAX FASTENER LG, FLAT HEAD, HEX SOCKET DRIVE IN THRD END
MANUFACTURERS CODE: 89954
THE MANUFACTURERS DATA:
Related Searches:
NAS1351-8-14P
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010513196
NSN
5305-01-051-3196
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.845 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.735 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD HEIGHT: 0.492 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 170000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 150000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1351 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.775 INCHES MINIMUM AND 0.875 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.375 INCHES MINIMUM AND 0.379 INCHES MAXIMUM
Related Searches:
815-1435
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010513197
NSN
5305-01-051-3197
MFG
ONAN CORPORATION DBA CUMMINS POWER GENERATION
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.417 INCHES NOMINAL
Related Searches:
FF-S-92
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305010513197
NSN
5305-01-051-3197
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.417 INCHES NOMINAL
Related Searches:
GS21-207C10X3-4
SETSCREW
NSN, MFG P/N
5305010513468
NSN
5305-01-051-3468
MFG
ITT CORPORATION DBA ITT GILFILLAN
Description
FASTENER LENGTH: 0.750 INCHES MINIMUM
MATERIAL: STEEL CORROSION RESISTING OVERALL
THREAD CLASS: 3A
THREAD LENGTH: 0.750 INCHES MAXIMUM
Related Searches:
1039-777
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010513681
NSN
5305-01-051-3681
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
DESIGN CONTROL REFERENCE: 1039-777
FASTENER LENGTH: 1.750 INCHES NOMINAL
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.047 INCHES NOMINAL
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 66503
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: COMP 16-18 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
Related Searches:
190962
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010513682
NSN
5305-01-051-3682
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
DESIGN CONTROL REFERENCE: 190962
FASTENER LENGTH: 0.896 INCHES MINIMUM AND 0.928 INCHES MAXIMUM
HEAD DIAMETER: 0.308 INCHES NOMINAL
HEAD HEIGHT: 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 66503
MATERIAL: STEEL CORROSION RESISTING OVERALL
MINIMUM TENSILE STRENGTH: 90000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.896 INCHES MINIMUM AND 0.928 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
Related Searches:
3366-034
SCREW,ADJUSTING
NSN, MFG P/N
5305010513836
NSN
5305-01-051-3836
MFG
WOODWARD GOVERNOR COMPANY DBA WOODWARD
Description
DESIGN CONTROL REFERENCE: 3366-034
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL AMS 5613,CASEHARDENED,8-32 UNC-3A THD,HEX DRIVE,RD WITH WRENCH FLATS HEAD,0.594 IN. FASTENER LG
MANUFACTURERS CODE: 66503
THE MANUFACTURERS DATA:
Related Searches:
12266654-2
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010513964
NSN
5305-01-051-3964
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
DESIGN CONTROL REFERENCE: 12266654-2
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 19207
MATERIAL: STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.159 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
12266654-2
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010513964
NSN
5305-01-051-3964
MFG
DRS SUSTAINMENT SYSTEMS INC. DIV DRS SUSTAINMENT SYSTEMS INC. USE CAGE CODE 98255 FOR CATALOGING.
Description
DESIGN CONTROL REFERENCE: 12266654-2
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 19207
MATERIAL: STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.159 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
2950-410-13
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305010513964
NSN
5305-01-051-3964
MFG
RECON/OPTICAL INC .
Description
DESIGN CONTROL REFERENCE: 12266654-2
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 19207
MATERIAL: STEEL COMP 303 OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.159 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
Related Searches:
1D691
SCREW,TAPPING
NSN, MFG P/N
5305010514322
NSN
5305-01-051-4322
MFG
GLOBE MOTORS INC.
Description
FASTENER LENGTH: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD DIAMETER: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
Related Searches:
BACS12GM3-16
SCREW,MACHINE
NSN, MFG P/N
5305010514324
NSN
5305-01-051-4324
MFG
VALLEY-TODECO INC.
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: BACS12GM3-16
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.332 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81205
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: EXTENDED POINT ON THREADED END 57 TO 63 DEGREES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.827 INCHES MINIMUM AND 0.920 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACS12GM3-16
SCREW,MACHINE
NSN, MFG P/N
5305010514324
NSN
5305-01-051-4324
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: BACS12GM3-16
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.332 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81205
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: EXTENDED POINT ON THREADED END 57 TO 63 DEGREES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.827 INCHES MINIMUM AND 0.920 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACS12GM3-16
SCREW,MACHINE
NSN, MFG P/N
5305010514324
NSN
5305-01-051-4324
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: BACS12GM3-16
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.332 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81205
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: EXTENDED POINT ON THREADED END 57 TO 63 DEGREES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.827 INCHES MINIMUM AND 0.920 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
BACS12GM3-16
SCREW,MACHINE
NSN, MFG P/N
5305010514324
NSN
5305-01-051-4324
MFG
FEDERAL MANUFACTURING CORPORATION
Description
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
DESIGN CONTROL REFERENCE: BACS12GM3-16
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM
HEAD DIAMETER: 0.332 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81205
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 4037 OR STEEL COMP 8630
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: EXTENDED POINT ON THREADED END 57 TO 63 DEGREES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.827 INCHES MINIMUM AND 0.920 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
