My Quote Request
No products added yet
5305-01-114-3628
20 Products
10-061-220-00
SCREW
NSN, MFG P/N
5305011143628
NSN
5305-01-114-3628
MFG
AHEARN AND SOPER CO INC
Description
SCREW
Related Searches:
150766
SCREW
NSN, MFG P/N
5305011143646
NSN
5305-01-114-3646
MFG
PRINCE ALEXANDER PARTNERS INC D IV ARCHITECTURE ENGIEERING AND ECONOMIC DEVELOPMENT
Description
SCREW
Related Searches:
105250-04
SCREW
NSN, MFG P/N
5305011143650
NSN
5305-01-114-3650
MFG
ROLM CORP MIL SPEC COMPUTERS
Description
SCREW
Related Searches:
1737AS14721-2
SCREW,MACHINE
NSN, MFG P/N
5305011143652
NSN
5305-01-114-3652
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.125 INCHES NOMINAL
HEAD STYLE: A1 HEXAGON
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.312 INCHES NOMINAL
Related Searches:
80-14721-2
SCREW,MACHINE
NSN, MFG P/N
5305011143652
NSN
5305-01-114-3652
MFG
UNITRON INC
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.125 INCHES NOMINAL
HEAD STYLE: A1 HEXAGON
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.312 INCHES NOMINAL
Related Searches:
NPP1032X3/8SSH
SCREW,MACHINE
NSN, MFG P/N
5305011143652
NSN
5305-01-114-3652
MFG
BISCO INDUSTRIES INC DBA NATIONAL PRECISION PRODUCTS COMPANY DIV NATIONAL PRECISION PRODUCTS
Description
FASTENER LENGTH: 0.375 INCHES NOMINAL
HEAD HEIGHT: 0.125 INCHES NOMINAL
HEAD STYLE: A1 HEXAGON
NOMINAL THREAD DIAMETER: 0.138 INCHES
SCREW MATERIAL: STEEL CORROSION RESISTING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.312 INCHES NOMINAL
Related Searches:
136435-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
136435-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: NASM51896-3
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.273 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OVERALL
Related Searches:
136435-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
136435-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
MFG
RAYTHEON COMPANY DBA RAYTHEON
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: NASM51896-3
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.273 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OVERALL
Related Searches:
180-00016-66
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
180-00016-66
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
MFG
OECO LLC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: NASM51896-3
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.273 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OVERALL
Related Searches:
FF-S-92
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
FF-S-92
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: NASM51896-3
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.273 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OVERALL
Related Searches:
MS51896-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
MS51896-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: NASM51896-3
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.273 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OVERALL
Related Searches:
NASM51896-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
NASM51896-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: NASM51896-3
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.273 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OVERALL
Related Searches:
NASM51896-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
NASM51896-3
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011143775
NSN
5305-01-114-3775
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: NASM51896-3
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.273 INCHES MINIMUM AND 0.324 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.078 INCHES MINIMUM AND 0.088 INCHES MAXIMUM
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C33 PAN NO. 2
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 9C STYLE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.176 INCHES MINIMUM AND 0.196 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OR STEEL COMP 302B OR STEEL COMP 303 PLUS X OR STEEL COMP 303CU OR STEEL COMP 303MA OVERALL
Related Searches:
15X-1325-S
SCREW,MACHINE
NSN, MFG P/N
5305011143776
NSN
5305-01-114-3776
MFG
MERITOR HEAVY VEHICLE SYSTEMS LLC
Description
DESIGN CONTROL REFERENCE: 15X-1325-S
FASTENER LENGTH: 1.750 INCHES NOMINAL
HEAD DIAMETER: 0.720 INCHES NOMINAL
HEAD HEIGHT: 0.220 INCHES NOMINAL
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 78500
NOMINAL THREAD DIAMETER: 0.500 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
Related Searches:
15X-1325-S
SCREW,MACHINE
NSN, MFG P/N
5305011143776
NSN
5305-01-114-3776
MFG
AXLETECH INTERNATIONAL INC.
Description
DESIGN CONTROL REFERENCE: 15X-1325-S
FASTENER LENGTH: 1.750 INCHES NOMINAL
HEAD DIAMETER: 0.720 INCHES NOMINAL
HEAD HEIGHT: 0.220 INCHES NOMINAL
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 78500
NOMINAL THREAD DIAMETER: 0.500 INCHES
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
Related Searches:
FF-S-92
SCREW,MACHINE
NSN, MFG P/N
5305011143779
NSN
5305-01-114-3779
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS18212-85
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: PLASTIC
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.338 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
MS18212-85
SCREW,MACHINE
NSN, MFG P/N
5305011143779
NSN
5305-01-114-3779
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS18212-85
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HEAD DIAMETER: 0.473 INCHES MINIMUM AND 0.492 INCHES MAXIMUM
HEAD HEIGHT: 0.130 INCHES MINIMUM AND 0.144 INCHES MAXIMUM
HEAD STYLE: A24 PAN NO. 2
INTERNAL DRIVE STYLE: B10 SLOT
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
NOMINAL THREAD DIAMETER: 0.250 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-92
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 9S STYLE
SCREW MATERIAL: PLASTIC
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-M-20693,TY 1 MIL SPEC SINGLE MATERIAL RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.338 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
D659-0044
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011143783
NSN
5305-01-114-3783
MFG
TYCO ELECTRONICS CORPORATION DIV RAYCHEM
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.230 INCHES NOMINAL
HEAD HEIGHT: 0.140 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PELLET THREADS
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.109 INCHES NOMINAL
Related Searches:
123-4645272ITEM27
SETSCREW
NSN, MFG P/N
5305011143784
NSN
5305-01-114-3784
MFG
NAVAL SHIP SYSTEMS COMMAND
Description
FASTENER LENGTH: 0.970 INCHES NOMINAL
HEAD HEIGHT: 0.310 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: NICKEL ALLOY R-405 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CL B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT DIAMETER: 0.575 INCHES MINIMUM AND 0.576 INCHES MAXIMUM
POINT LENGTH: 0.450 INCHES NOMINAL
POINT STYLE: F10 DOG
SPECIAL FEATURES: ONE DRILLED HOLE IN THREAD 0.125 IN. DIA BY 0.156 IN. DEEP
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.150 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
87547-1502ITEM27
SETSCREW
NSN, MFG P/N
5305011143784
NSN
5305-01-114-3784
MFG
ELECTRIC BOAT CORPORATION
Description
FASTENER LENGTH: 0.970 INCHES NOMINAL
HEAD HEIGHT: 0.310 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: NICKEL ALLOY R-405 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-N-281 CL B FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT DIAMETER: 0.575 INCHES MINIMUM AND 0.576 INCHES MAXIMUM
POINT LENGTH: 0.450 INCHES NOMINAL
POINT STYLE: F10 DOG
SPECIAL FEATURES: ONE DRILLED HOLE IN THREAD 0.125 IN. DIA BY 0.156 IN. DEEP
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.150 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
