My Quote Request
No products added yet
5305-01-133-2179
20 Products
346-0500-010
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305011332179
NSN
5305-01-133-2179
MFG
COLUMBIA NUT & BOLT LLC
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.056 INCHES MINIMUM AND 0.071 INCHES MAXIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
PRIMARY WASHER STYLE: G30 FLAT
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.900 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WASHER QUANTITY: 1
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
Related Searches:
HT4041-3-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011331573
NSN
5305-01-133-1573
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 23M112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4041-3-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011331573
NSN
5305-01-133-1573
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 23M112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4041-3-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011331573
NSN
5305-01-133-1573
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 23M112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4041-3-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011331573
NSN
5305-01-133-1573
MFG
HUCK INTL INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 23M112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4041-3-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011331573
NSN
5305-01-133-1573
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 23M112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4041-3-4-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305011331573
NSN
5305-01-133-1573
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.547 INCHES MINIMUM AND 0.577 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD DIAMETER: 0.297 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 23M112 FSCM 76301 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.287 INCHES MINIMUM AND 0.337 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
133538
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011332060
NSN
5305-01-133-2060
MFG
CUMMINS INC.
Description
FASTENER LENGTH: 3.440 INCHES MINIMUM AND 3.500 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.940 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
133538
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305011332060
NSN
5305-01-133-2060
MFG
INTERNATIONAL TRUCKS AUSTRALIA LIMITED
Description
FASTENER LENGTH: 3.440 INCHES MINIMUM AND 3.500 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A574 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.940 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
587990
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332083
NSN
5305-01-133-2083
587990
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332083
NSN
5305-01-133-2083
MFG
EASTMAN KODAK COMPANY DBA KODAK
Description
DESIGN CONTROL REFERENCE: 587990
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 0.825 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.369 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
HEAD DIAMETER: 0.500 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 19139
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: EK 135B,FSCM 19139 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SECOND DIAMETER FROM HEAD: 0.149 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
587990
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332083
NSN
5305-01-133-2083
587990
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332083
NSN
5305-01-133-2083
MFG
KODAK GMBH
Description
DESIGN CONTROL REFERENCE: 587990
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 2
FASTENER LENGTH: 0.825 INCHES NOMINAL
FIRST DIAMETER FROM HEAD: 0.369 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
HEAD DIAMETER: 0.500 INCHES NOMINAL
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 19139
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: EK 135B,FSCM 19139 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SECOND DIAMETER FROM HEAD: 0.149 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
1778HX
SCREW,MACHINE
NSN, MFG P/N
5305011332114
NSN
5305-01-133-2114
MFG
OSHKOSH CORPORATION
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.452 INCHES MINIMUM AND 0.507 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: NSN 2320-01-318-9902 HET (HEAVY EQUIPMENT TRANSPORTER); NSN 4210-01-486-1035 TACTICAL FIRE FIGHTING TRUCK (TFFT); FAMILY OF HEMTT VEHICLES (HEAVY EXPANDED MOBILITY TACTICAL TRUCKS)
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.250 INCHES
SCREW MATERIAL: STEEL
SCREW SURFACE TREATMENT: CHROMATE ZINC
SPECIAL FEATURES: NHA NSN 2510-01-354-4365 RIGHT SIDE DOOR; TM 9-2320-360-24P FIG 201
THREAD CLASS: 2
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.600 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
Related Searches:
6148-SS-2528-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332174
NSN
5305-01-133-2174
6148-SS-2528-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332174
NSN
5305-01-133-2174
MFG
CAREY MANUFACTURING COMPANY INC. DBA AMATOM ELECTRONIC HARDWARES USE CAGE CODE 5W748 FOR CATALOGING.
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.922 INCHES MINIMUM AND 0.954 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
HEAD DIAMETER: 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C69 KNURLED NO. 4
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 203EZ OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303MA OR STEEL COMP 303CU OR STEEL COMP 303 PLUS X OR STEEL COMP 416 OR STEEL COMP 416SE OR STEEL COMP 416 PLUS X OR STEEL COMP 430F OR STEEL COMP M1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: STRAIGHT KNURL
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6148-SS-2528-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332174
NSN
5305-01-133-2174
6148-SS-2528-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332174
NSN
5305-01-133-2174
MFG
NEW HAVEN MFG CORP AMATOM ELECTRONIC HARDWARE DIV
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.922 INCHES MINIMUM AND 0.954 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
HEAD DIAMETER: 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C69 KNURLED NO. 4
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 203EZ OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303MA OR STEEL COMP 303CU OR STEEL COMP 303 PLUS X OR STEEL COMP 416 OR STEEL COMP 416SE OR STEEL COMP 416 PLUS X OR STEEL COMP 430F OR STEEL COMP M1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: STRAIGHT KNURL
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
6148SS2528-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332174
NSN
5305-01-133-2174
6148SS2528-7
SCREW,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5305011332174
NSN
5305-01-133-2174
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.553 INCHES MINIMUM AND 0.573 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.922 INCHES MINIMUM AND 0.954 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.170 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
HEAD DIAMETER: 0.557 INCHES MINIMUM AND 0.567 INCHES MAXIMUM
HEAD HEIGHT: 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLE: C69 KNURLED NO. 4
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 203EZ OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 303MA OR STEEL COMP 303CU OR STEEL COMP 303 PLUS X OR STEEL COMP 416 OR STEEL COMP 416SE OR STEEL COMP 416 PLUS X OR STEEL COMP 430F OR STEEL COMP M1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A581 ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: STRAIGHT KNURL
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
09714008A
SCREW,MACHINE
NSN, MFG P/N
5305011332175
NSN
5305-01-133-2175
MFG
RICOH AMERICAS CORPORATION
Description
DESIGN CONTROL REFERENCE: 09714008A
FASTENER LENGTH: 10.40 MILLIMETERS NOMINAL
HEAD DIAMETER: 6.95 MILLIMETERS NOMINAL
HEAD STYLE: A26 UNDERCUT PAN NO. 2
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
MANUFACTURERS CODE: 29382
NOMINAL THREAD DIAMETER: 3.6 MILLIMETERS
SCREW MATERIAL: PLASTIC
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: MJ
Related Searches:
09724014A
SCREW,MACHINE
NSN, MFG P/N
5305011332176
NSN
5305-01-133-2176
MFG
RICOH AMERICAS CORPORATION
Description
DESIGN CONTROL REFERENCE: 09724014A
FASTENER LENGTH: 14.10 MILLIMETERS NOMINAL
HEAD DIAMETER: 6.95 MILLIMETERS NOMINAL
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B2 CROSS RECESS TYPE II
MANUFACTURERS CODE: 29382
NOMINAL THREAD DIAMETER: 3.5 MILLIMETERS
SCREW MATERIAL: PLASTIC
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: MJ
Related Searches:
NAS662C2R5B
SCREW,MACHINE
NSN, MFG P/N
5305011332177
NSN
5305-01-133-2177
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COLOR: BLACK
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.282 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD DIAMETER: 0.156 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SCREW MATERIAL: STEEL COMP 303 OR STEEL COMP 302
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIFICATION/STANDARD DATA: 80205-NAS662 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.246 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN515-4R11
SCREW,MACHINE
NSN, MFG P/N
5305011332178
NSN
5305-01-133-2178
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN515-4R11
FASTENER LENGTH: 0.657 INCHES MINIMUM AND 0.688 INCHES MAXIMUM
HEAD DIAMETER: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD HEIGHT: 0.086 INCHES MAXIMUM
HEAD STYLE: A28 ROUND
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 1010
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: CADMIUM
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY1,CL3 FED SPEC SINGLE TREATMENT RESPONSE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.607 INCHES MINIMUM AND 0.688 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
346-0500-010
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305011332179
NSN
5305-01-133-2179
MFG
ROCKWELL COLLINS INC. DIV GOVERNMENT SYSTEMS - DALLAS
Description
FASTENER LENGTH: 1.000 INCHES NOMINAL
HARDNESS RATING: 23.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
PRIMARY WASHER MATERIAL THICKNESS: 0.056 INCHES MINIMUM AND 0.071 INCHES MAXIMUM
PRIMARY WASHER OUTSIDE DIAMETER: 0.495 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
PRIMARY WASHER STYLE: G30 FLAT
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.900 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WASHER QUANTITY: 1
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
