My Quote Request
No products added yet
5305-01-266-8350
20 Products
704AS9843-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668350
NSN
5305-01-266-8350
MFG
NAVAL AIR SYSTEMS COMMAND
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.408 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD DIAMETER: 0.143 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: PLASTIC LOCKING FEATURE STEEL COMP 321 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 347 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIAL FEATURES: LOCKING ELEMENT SHALL BEGIN NO MORE THAN TWO AND ONE HALF THREADS FROM SCREW END
SURFACE TREATMENT: PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.336 INCHES MINIMUM AND 0.409 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
899843-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668350
NSN
5305-01-266-8350
MFG
RAYTHEON COMPANY
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.408 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD DIAMETER: 0.143 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: PLASTIC LOCKING FEATURE STEEL COMP 321 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 347 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIAL FEATURES: LOCKING ELEMENT SHALL BEGIN NO MORE THAN TWO AND ONE HALF THREADS FROM SCREW END
SURFACE TREATMENT: PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.336 INCHES MINIMUM AND 0.409 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
S20620-4
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668350
NSN
5305-01-266-8350
MFG
NYLOK CORPORATION DBA NYLOK WESTERN FASTENER DIV NYLOK WESTERN
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.408 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD DIAMETER: 0.143 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: PLASTIC LOCKING FEATURE STEEL COMP 321 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 347 FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-18240 MIL SPEC SINGLE MATERIAL RESPONSE LOCKING FEATURE
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.086 INCHES
SPECIAL FEATURES: LOCKING ELEMENT SHALL BEGIN NO MORE THAN TWO AND ONE HALF THREADS FROM SCREW END
SURFACE TREATMENT: PASSIVATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.336 INCHES MINIMUM AND 0.409 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
FF-S-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668351
NSN
5305-01-266-8351
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR STRIP THREADS
MANUFACTURERS CODE: 81348
MATERIAL: PLASTIC LOCKING FEATURE STEEL FASTENER
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.663 INCHES MINIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1406 INCHES MINIMUM AND 0.1426 INCHES MAXIMUM
Related Searches:
MS16998-21L
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668351
NSN
5305-01-266-8351
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR STRIP THREADS
MANUFACTURERS CODE: 81348
MATERIAL: PLASTIC LOCKING FEATURE STEEL FASTENER
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.663 INCHES MINIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1406 INCHES MINIMUM AND 0.1426 INCHES MAXIMUM
Related Searches:
NAS1351-08LL12P
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668351
NSN
5305-01-266-8351
NAS1351-08LL12P
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668351
NSN
5305-01-266-8351
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM FASTENER
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
LOCKING FEATURE: PATCH OR STRIP THREADS
MANUFACTURERS CODE: 81348
MATERIAL: PLASTIC LOCKING FEATURE STEEL FASTENER
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 155000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.164 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.663 INCHES MINIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.1406 INCHES MINIMUM AND 0.1426 INCHES MAXIMUM
Related Searches:
10A4600/10A4656SXBHBECX-4
SETSCREW
NSN, MFG P/N
5305012668352
NSN
5305-01-266-8352
MFG
FISCHER AND PORTER CO
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT STYLE: F17 FULL DOG
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
396C210U02
SETSCREW
NSN, MFG P/N
5305012668352
NSN
5305-01-266-8352
MFG
FISCHER AND PORTER CO
Description
FASTENER LENGTH: 0.500 INCHES NOMINAL
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT STYLE: F17 FULL DOG
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
330-1028-00
SCREW,DRIVE
NSN, MFG P/N
5305012668354
NSN
5305-01-266-8354
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.114 INCHES
NONMACHINE THREAD STYLE: A16 DRIVE SCREW (TYPE U)
PILOT DIAMETER: 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
PILOT LENGTH: 0.047 INCHES NOMINAL
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1 CL B FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
330-1028-000
SCREW,DRIVE
NSN, MFG P/N
5305012668354
NSN
5305-01-266-8354
MFG
USM CORP SUB OF EMHART INDUSTRIES INC PARKER-KALON FASTENER DIV
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
HEAD DIAMETER: 0.193 INCHES MINIMUM AND 0.211 INCHES MAXIMUM
HEAD HEIGHT: 0.075 INCHES MINIMUM AND 0.086 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
MATERIAL: STEEL OVERALL
NONMACHINE NOMINAL THREAD DIAMETER: 0.114 INCHES
NONMACHINE THREAD STYLE: A16 DRIVE SCREW (TYPE U)
PILOT DIAMETER: 0.092 INCHES MINIMUM AND 0.096 INCHES MAXIMUM
PILOT LENGTH: 0.047 INCHES NOMINAL
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 1 CL B FED SPEC SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
33-215-005
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668363
NSN
5305-01-266-8363
MFG
MICO INC DBA MICO WEST
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
124490-1
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668364
NSN
5305-01-266-8364
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV MISSILES AND FIRE CONTROL - ARCHBALD
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: LLX-HX4-8140
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.724 INCHES MINIMUM AND 0.756 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 14153
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SHANK UNTHREADED HOLE DIAMETER: 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM FIRST HOLE
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.651 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
Related Searches:
LLX-HX4-8140
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668364
NSN
5305-01-266-8364
MFG
DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: LLX-HX4-8140
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.724 INCHES MINIMUM AND 0.756 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.303 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 14153
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
SHANK UNTHREADED HOLE DIAMETER: 0.061 INCHES MINIMUM AND 0.065 INCHES MAXIMUM FIRST HOLE
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.651 INCHES MINIMUM AND 0.734 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
Related Searches:
FF-S-86
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668365
NSN
5305-01-266-8365
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL C MINIMUM OVERALL
HEAD DIAMETER: 0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81349
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.581 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
MS24674-45
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668365
NSN
5305-01-266-8365
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL C MINIMUM OVERALL
HEAD DIAMETER: 0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81349
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.581 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
MS24674-45
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668365
NSN
5305-01-266-8365
MFG
FLIGHT REFUELLING LIMITED T/A COBHAM MISSION EQUIPMENT
Description
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL C MINIMUM OVERALL
HEAD DIAMETER: 0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81349
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.581 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
MS24674-45
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668365
NSN
5305-01-266-8365
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL C MINIMUM OVERALL
HEAD DIAMETER: 0.457 INCHES MINIMUM AND 0.469 INCHES MAXIMUM
HEAD HEIGHT: 0.306 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81349
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 6 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.581 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.250 INCHES MINIMUM AND 0.253 INCHES MAXIMUM
~1: OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
Related Searches:
324-1659-960
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668366
NSN
5305-01-266-8366
MFG
ROCKWELL COLLINS INC. DBA GOVERNMENT SYSTEMS DIV GOVERNMENT SYSTEMS
Description
FASTENER LENGTH: 2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL C MINIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL
Related Searches:
324-1659-960
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668366
NSN
5305-01-266-8366
MFG
BRISTOL BABCOCK INC INSTRUMENTS-SYSTEMS DIV SUB OF BABCOCK INTL INC
Description
FASTENER LENGTH: 2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL C MINIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OR STEEL COMP XM-7 OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.188 INCHES NOMINAL
Related Searches:
138201
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305012668367
NSN
5305-01-266-8367
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
COLOR: BLACK OVERALL
FASTENER LENGTH: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HARDNESS RATING: 38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C66 KNURLED NO. 1
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL CORROSION RESISTING OVERALL
MINIMUM TENSILE STRENGTH: 190000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 170000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: OXIDE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.620 INCHES MINIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.1875 INCHES NOMINAL
