My Quote Request
No products added yet
5305-01-364-3576
20 Products
12346514-114
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013643576
NSN
5305-01-364-3576
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 1.750 INCHES NOMINAL
HEAD HEIGHT: 0.323 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.7500 INCHES NOMINAL
Related Searches:
12346514-116
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013643577
NSN
5305-01-364-3577
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 2.250 INCHES NOMINAL
HEAD HEIGHT: 0.323 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.7500 INCHES NOMINAL
Related Searches:
12346514-62
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013643580
NSN
5305-01-364-3580
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD HEIGHT: 1.000 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES NOMINAL
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 1.250 INCHES NOMINAL
Related Searches:
12346514-113
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013643581
NSN
5305-01-364-3581
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 1.500 INCHES NOMINAL
HEAD HEIGHT: 0.323 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES NOMINAL
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.7500 INCHES NOMINAL
Related Searches:
12346514-66
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013643582
NSN
5305-01-364-3582
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 2.000 INCHES NOMINAL
HEAD HEIGHT: 0.243 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES NOMINAL
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.5625 INCHES NOMINAL
Related Searches:
12346514-9
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013643583
NSN
5305-01-364-3583
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 1.125 INCHES NOMINAL
HEAD HEIGHT: 0.183 INCHES NOMINAL
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 8 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.4375 INCHES NOMINAL
Related Searches:
NAS1580A4R19D
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013643584
NSN
5305-01-364-3584
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.450 INCHES MINIMUM AND 1.500 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.576 INCHES MINIMUM AND 1.606 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 AND STEEL COMP E4340 AND STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/
Related Searches:
NAS1580A4R32D
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013643585
NSN
5305-01-364-3585
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.262 INCHES MINIMUM AND 2.312 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 2.388 INCHES MINIMUM AND 2.418 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 1.990 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.5066 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 AND STEEL COMP E4340 AND STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE AND MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/
Related Searches:
NAS1580V3T15D
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013643586
NSN
5305-01-364-3586
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.160 INCHES MINIMUM AND 1.210 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.286 INCHES MINIMUM AND 1.316 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.339 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 MIL SPEC SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA: 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLA
Related Searches:
NAS1580V5T15D
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013643587
NSN
5305-01-364-3587
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.294 INCHES MINIMUM AND 1.344 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.424 INCHES MINIMUM AND 1.454 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM
HEAD DIAMETER: 0.578 INCHES MINIMUM AND 0.6335 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.3125 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA: 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CL
Related Searches:
NAS1580V5T14
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013643588
NSN
5305-01-364-3588
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.361 INCHES MINIMUM AND 1.391 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
HEAD DIAMETER: 0.578 INCHES MINIMUM AND 0.633 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.3125 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.501 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1580V6T8
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013643589
NSN
5305-01-364-3589
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.079 INCHES MINIMUM AND 1.109 INCHES MAXIMUM
GRIP DIAMETER: 0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD DIAMETER: 0.717 INCHES MINIMUM AND 0.7604 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.3750 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.594 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1580V3T6D
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013643590
NSN
5305-01-364-3590
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.597 INCHES MINIMUM AND 0.647 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 0.723 INCHES MINIMUM AND 0.753 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD DIAMETER: 0.339 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA: 80205-NAS1580 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLA
Related Searches:
NAS664V3HTL
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013643591
NSN
5305-01-364-3591
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.603 INCHES MINIMUM AND 0.623 INCHES MAXIMUM
FEATURES PROVIDED: DRY FILM LUBRICANT
GRIP DIAMETER: 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.506 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS664 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.425 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNAT
Related Searches:
MS6C4PP-SC2
SCREW,MACHINE
NSN, MFG P/N
5305013643803
NSN
5305-01-364-3803
MFG
SAMSON INDUSTRIES INC
Description
SCREW,MACHINE
Related Searches:
2D60120PK
SCREW,MACHINE
NSN, MFG P/N
5305013643804
NSN
5305-01-364-3804
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN MARINE SYSTEMS DIV MARINE SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
HEAD DIAMETER: 0.515 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: HIGH-TORQUE RECESS PER MS33750-5
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.389 INCHES MINIMUM AND 0.449 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
2D60120PK-001
SCREW,MACHINE
NSN, MFG P/N
5305013643804
NSN
5305-01-364-3804
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN MARINE SYSTEMS DIV MARINE SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM
HEAD DIAMETER: 0.515 INCHES MINIMUM AND 0.565 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B6 HIGH-TORQUE
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SCREW MATERIAL: IRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
SPECIAL FEATURES: HIGH-TORQUE RECESS PER MS33750-5
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.389 INCHES MINIMUM AND 0.449 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
CS6C8FH-SBO
SCREW,MACHINE
NSN, MFG P/N
5305013644194
NSN
5305-01-364-4194
MFG
SAMSON INDUSTRIES INC
Description
SCREW,MACHINE
Related Searches:
901970-8200
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305013644195
NSN
5305-01-364-4195
MFG
ISUZU MOTOR CO. LTD
Description
SCREW,ASSEMBLED WASHER
Related Searches:
901970-8200
SCREW,ASSEMBLED WASHER
NSN, MFG P/N
5305013644195
NSN
5305-01-364-4195
MFG
ISUZU MOTOR CO. LTD
Description
SCREW,ASSEMBLED WASHER
