My Quote Request
No products added yet
5305-01-521-9231
20 Products
13005044
SETSCREW
NSN, MFG P/N
5305015219231
NSN
5305-01-521-9231
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
Related Searches:
HT4027-5-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219172
NSN
5305-01-521-9172
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.858 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-5-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219172
NSN
5305-01-521-9172
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.858 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219172
NSN
5305-01-521-9172
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.858 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-5-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219172
NSN
5305-01-521-9172
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.858 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-5-5
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219172
NSN
5305-01-521-9172
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.828 INCHES MINIMUM AND 0.858 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-5-9
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219174
NSN
5305-01-521-9174
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.078 INCHES MINIMUM AND 1.108 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HT4027-5-9
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219174
NSN
5305-01-521-9174
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.078 INCHES MINIMUM AND 1.108 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219174
NSN
5305-01-521-9174
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.078 INCHES MINIMUM AND 1.108 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
ST3M557-5-9
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219174
NSN
5305-01-521-9174
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.078 INCHES MINIMUM AND 1.108 INCHES MAXIMUM
GRIP DIAMETER: 0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM
HEAD DIAMETER: 0.477 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: FWD FUSELAGE
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.531 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M1262C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
SPS TECHNOLOGIES INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
TX1024C3-6-5A
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015219205
NSN
5305-01-521-9205
MFG
ALCOA FASTENING SYSTEMS FAIRCHILD FA STENERS EUROPE - VSD GMBH
Description
COUNTERSINK ANGLE: 99.0 DEGREES NOMINAL AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.687 INCHES NOMINAL
GRIP DIAMETER: 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.375 INCHES MINIMUM
HEAD DIAMETER: 0.293 INCHES MINIMUM AND 0.301 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100 DEGREE REDUCED HEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH INCONCEL 718 (125 KSI SHEAR)
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: NICKEL ALLOY 718 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPLINE MAJOR DIAMETER: 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.313 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
13005044
SETSCREW
NSN, MFG P/N
5305015219231
NSN
5305-01-521-9231
Description
FASTENER LENGTH: 0.250 INCHES NOMINAL
