My Quote Request
No products added yet
5305-01-537-0792
20 Products
15261-9301-0
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015370792
NSN
5305-01-537-0792
MFG
KUBOTA TRACTOR CORP
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SCREW, ROUND HEAD
Related Searches:
15531-9301-0
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015370794
NSN
5305-01-537-0794
MFG
KUBOTA TRACTOR CORP
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SCREW, ROUND HEAD
Related Searches:
NAS1351C08-12
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015370906
NSN
5305-01-537-0906
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 1.034 INCHES MINIMUM AND 1.039 INCHES MAXIMUM
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES NOMINAL
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.141 INCHES MINIMUM
Related Searches:
NAS1351C08-6
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015370915
NSN
5305-01-537-0915
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
FASTENER LENGTH: 0.534 INCHES MINIMUM AND 0.539 INCHES MAXIMUM
HEAD DIAMETER: 0.262 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD HEIGHT: 0.159 INCHES MINIMUM AND 0.164 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL CORROSION RESISTING OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES MINIMUM
THREAD QUANTITY PER INCH: 36
THREAD SERIES DESIGNATOR: UNRF
WIDTH ACROSS FLATS: 0.141 INCHES NOMINAL
Related Searches:
CA2252-M6-20.5
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305015370986
NSN
5305-01-537-0986
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
III END ITEM IDENTIFICATION: RQ-4A
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SCREW CAPTIVE
Related Searches:
NAS1802-04-10
SCREW,MACHINE
NSN, MFG P/N
5305015371023
NSN
5305-01-537-1023
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
SCREW,MACHINE
Related Searches:
90353A228
SCREW,MACHINE
NSN, MFG P/N
5305015371026
NSN
5305-01-537-1026
Description
SCREW,MACHINE
Related Searches:
NAS1802-4-12P
SCREW,MACHINE
NSN, MFG P/N
5305015371034
NSN
5305-01-537-1034
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
SCREW,MACHINE
Related Searches:
31126R1
SCREW,MACHINE
NSN, MFG P/N
5305015371134
NSN
5305-01-537-1134
MFG
NAVISTAR INTL CORP TRUCK BR OHIO PLANT
Description
III END ITEM IDENTIFICATION: 2320-01-517-4333
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SCREW MACH M6X20MM
Related Searches:
12414419-047
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015371530
NSN
5305-01-537-1530
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
HEAD STYLE: C1 HEXAGON
III END ITEM IDENTIFICATION: 2320-01-355-3064 TRUCK, CARGO
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: IAW ISO898, PART 1 ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 4.0 MILLIMETERS
SURFACE TREATMENT: ZINC OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 40.0 MILLIMETERS NOMINAL
Related Searches:
15841-1423-0
SETSCREW
NSN, MFG P/N
5305015371683
NSN
5305-01-537-1683
MFG
KUBOTA TRACTOR CORP
Description
SETSCREW
Related Searches:
FC01223
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015371801
NSN
5305-01-537-1801
MFG
LASER DEVICES INC. DBA LDI
Description
SCREW,CAP,HEXAGON HEAD
Related Searches:
AES07M06A030CG9AA1
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015371803
NSN
5305-01-537-1803
AES07M06A030CG9AA1
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015371803
NSN
5305-01-537-1803
MFG
AMERICAN SOCIETY OF MECHANICAL ENGINEERS INC DBA ASME
Description
III END ITEM IDENTIFICATION: HOWITZER,155MM,M777
SPECIAL FEATURES: COLOR BLACK
Related Searches:
S231NA38MMND0568JMCG1
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015371803
NSN
5305-01-537-1803
S231NA38MMND0568JMCG1
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305015371803
NSN
5305-01-537-1803
MFG
AMERICAN SOCIETY OF MECHANICAL ENGINEERS INC DBA ASME
Description
III END ITEM IDENTIFICATION: HOWITZER,155MM,M777
SPECIAL FEATURES: COLOR BLACK
Related Searches:
MHW003-042ALBL
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305015371811
NSN
5305-01-537-1811
MFG
L-3 INSIGHT TECHNOLOGY INCORPORATED
Description
SCREW,CAP,SOCKET HEAD
Related Searches:
CA21351-5-4RS
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015371816
NSN
5305-01-537-1816
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.162 INCHES NOMINAL
GRIP DIAMETER: 0.311 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
GRIP LENGTH: 0.291 INCHES MINIMUM AND 0.430 INCHES MAXIMUM
HEAD DIAMETER: 0.542 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F-22 RAPTOR(EMD)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: STUD BOLT
III SUPPLEMENTARY FEATURES: STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BEFORE INSTALLING
LOCKING FEATURE: DETENT RING LOCKING FEATURE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MS 5731 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS 5737 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 4600 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT CHAMFER ANGLE: 45.0 DEGREES NOMINAL
POINT DIAMETER: 0.267 INCHES MINIMUM AND 0.272 INCHES MAXIMUM
POINT LENGTH: 0.100 INCHES NOMINAL
POINT STYLE: F5 CHAMFER DOG
SINGLE SHEAR STRENGTH: 6490 POUNDS PER SQUARE INCH
SPECIAL FEATURES: DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AREOSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOLD-OUT SPRING INSTERTED; 2 LEAD THREAD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.722 INCHES MINIMUM AND 0.771 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CA21351-6-12RS
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015371817
NSN
5305-01-537-1817
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.755 INCHES NOMINAL
GRIP DIAMETER: 0.374 INCHES NOMINAL
GRIP LENGTH: 0.851 INCHES MINIMUM AND 0.990 INCHES MAXIMUM
HEAD DIAMETER: 0.672 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F-22 RAPTOR(EMD)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: STUD BOLT
III SUPPLEMENTARY FEATURES: STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BEFORE INSTALLING
LOCKING FEATURE: DETENT RING LOCKING FEATURE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MS 5731 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS 5737 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 7380 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
POINT CHAMFER ANGLE: 45.0 DEGREES NOMINAL
POINT DIAMETER: 0.330 INCHES MINIMUM AND 0.335 INCHES MAXIMUM
POINT LENGTH: 0.100 INCHES NOMINAL
POINT STYLE: F5 CHAMFER DOG
SINGLE SHEAR STRENGTH: 9400 POUNDS PER SQUARE INCH
SPECIAL FEATURES: DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOLD-OUT SPRING INSERTED; 2 LEAD THREAD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.665 INCHES MINIMUM AND 0.804 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CA21351-4-12RS
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015371846
NSN
5305-01-537-1846
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.657 INCHES NOMINAL
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.851 INCHES MINIMUM AND 0.990 INCHES MAXIMUM
HEAD DIAMETER: 0.435 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F-22 RAPTOR
III PART NAME ASSIGNED BY CONTROLLING AGENCY: STUD BOLT
III SUPPLEMENTARY FEATURES: STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BEFORE INSTALLING
LOCKING FEATURE: DETENT RING LOCKING FEATURE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MS5731 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS5737 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 2845 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT CHAMFER ANGLE: 45.0 DEGREES NOMINAL
POINT DIAMETER: 0.211 INCHES MINIMUM AND 0.216 INCHES MAXIMUM
POINT LENGTH: 0.100 INCHES NOMINAL
POINT STYLE: F5 CHAMFER DOG
SINGLE SHEAR STRENGTH: 4140 POUNDS PER SQUARE INCH
SPECIAL FEATURES: DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP: WIRE FORM HOLD-OUT SPRING INSERTED; 2 LEAD THREAD.
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.567 INCHES MINIMUM AND 0.706 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CA21351-4-14RS
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305015371847
NSN
5305-01-537-1847
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.797 INCHES NOMINAL
GRIP DIAMETER: 0.249 INCHES NOMINAL
GRIP LENGTH: 0.991 INCHES MINIMUM AND 1.130 INCHES MAXIMUM
HEAD DIAMETER: 0.435 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F-22 RAPTOR
III PART NAME ASSIGNED BY CONTROLLING AGENCY: STUD BOLT
III SUPPLEMENTARY FEATURES: STUD BOLTS SHALL HAVE POLYPROPLENE HEAD PROTECTIVE RING INSTALLED FOR SHIPPING, CUSTOMER TO REMOVE RING BEFORE INSTALLING
LOCKING FEATURE: DETENT RING LOCKING FEATURE
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MS5731 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OR AMS5737 NATIONAL STD/SPEC 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 2845 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
POINT CHAMFER ANGLE: 45.0 DEGREES NOMINAL
POINT DIAMETER: 0.211 INCHES MINIMUM AND 0.216 INCHES MAXIMUM
POINT LENGTH: 0.100 INCHES NOMINAL
POINT STYLE: F5 CHAMFER DOG
SINGLE SHEAR STRENGTH: 4140 POUNDS PER SQUARE INCH
SPECIAL FEATURES: DRIVE STYLE IS: RADIAL-SLOT RECESS/ FAIRCHILD AEROSPACE, NOT LISTED THIS FIIG. BORED HOLE, THREADED END, 0.130 IN DIA, 0.620 IN DP; WIRE FORM HOLD-OUT SPRING INSERTED; 2 LEAD THREAD.
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS QQ-P-35 NATIONAL STD/SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.567 INCHES MINIMUM AND 0.706 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
CA2292-06-15-12
SCREW ASSEMBLY,PANEL
NSN, MFG P/N
5305015371852
NSN
5305-01-537-1852
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TRIDAIR PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.750 INCHES NOMINAL
HEAD DIAMETER: 0.231 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
III END ITEM IDENTIFICATION: F-22 RAPTOR (EMD)
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SCREW ASSEMBLY, PANEL
INTERNAL DRIVE STYLE: D24 TORX
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL ACCOMMODATED THICKNESS: 0.492 INCHES NOMINAL
NOMINAL THREAD DIAMETER: 0.138 INCHES
SPECIAL FEATURES: TWO SLOTS CUT 180 DEG APART, 0.650 IN LG
SPLINE MAJOR DIAMETER: 0.111 INCHES NOMINAL
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJC
