My Quote Request
No products added yet
5310-01-056-4300
20 Products
132007
NUT,CLIP-ON
NSN, MFG P/N
5310010564300
NSN
5310-01-056-4300
MFG
MONADNOCK COMPANY THE DBA LISI AEROSPACE
Description
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.176 INCHES NOMINAL
HARDNESS RATING: NOT RATED
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
LUBRICATION: DRY FILM LUBRICANT
MATERIAL: STEEL COMP 1050 OVERALL
NOMINAL THREAD SIZE: 0.138 INCHES
NUT STYLE: A399 CYLINDRICAL ANCHOR
PANEL THICKNESS: 0.066 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES: UNJC
Related Searches:
T65C524CBCM
NUT,SELF-LOCKING,PLATE
NSN, MFG P/N
5310010563540
NSN
5310-01-056-3540
MFG
SPS TECHNOLOGIES LLC DBA CHERRY AEROSPACE DIV
Description
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 0.998 INCHES MINIMUM AND 1.002 INCHES MAXIMUM
COUNTERBORE DIAMETER: 0.317 INCHES MINIMUM NUT
DISTANCE FROM APERTURE CENTER TO MOUNTING HOLE CENTER: 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM
FEATURES PROVIDED: FLOATING NUT
HARDNESS RATING: 49.0 ROCKWELL C MAXIMUM
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
LUBRICATION: DRY FILM LUBRICANT
MATERIAL: IRON ALLOY 660 OVERALL
MOUNTING HOLE ARRANGEMENT STYLE: F38 2 HOLES
MOUNTING HOLE DIAMETER: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
NOMINAL THREAD SIZE: 0.312 INCHES
NUT COUNTERBORE DEPTH: 0.062 INCHES MINIMUM NUT
NUT HEIGHT: 0.328 INCHES MAXIMUM
NUT LENGTH: 1.292 INCHES MAXIMUM
NUT MOUNTING PROVISION: DIMPLED HOLES
NUT STYLE: A116 PLATE
PLATE THICKNESS: 0.045 INCHES MAXIMUM
PLATE WIDTH: 0.412 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
SPECIAL FEATURES: NUT MTG PROVISIONS MAY HAVE COUNTERSUNK HOLES OPPOSITE NUT PROJECTION SIDE,COUNTERSINK ANGLE 98 DEG MIN 102 DEG MAX
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: 450.0 DEG FAHRENHEIT NOMINAL
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 24
THREAD SERIES: UNJF
Related Searches:
BACN10TS3-8
NUT,SELF-LOCKING,PLATE
NSN, MFG P/N
5310010563541
NSN
5310-01-056-3541
MFG
THE BOEING COMPANY DBA BOEING
Description
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
DESIGN CONTROL REFERENCE: BACN10TS3-8
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
HARDNESS RATING: NOT RATED
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
MANUFACTURERS CODE: 81205
MATERIAL: PLASTIC OVERALL EXCEPT THREADS STEEL THREADS
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-395 6/6 TYPE 1 CLASS 1 OR 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT THREADS
MOUNTING HOLE ARRANGEMENT STYLE: F57 2 HOLES
MOUNTING HOLE DIAMETER: 0.133 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
NOMINAL THREAD SIZE: 0.190 INCHES
NUT HEIGHT: ANY ACCEPTABLE
NUT LENGTH: 1.210 INCHES MINIMUM AND 1.390 INCHES MAXIMUM
NUT MOUNTING PROVISION: STRAIGHT HOLES
NUT STYLE: A129 PLATE
PLATE THICKNESS: 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
PLATE WIDTH: 1.440 INCHES MINIMUM AND 1.590 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM AND CHROMATE THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES THREADS
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES: UNF
Related Searches:
BACN10TS3-20
NUT,SELF-LOCKING,PLATE
NSN, MFG P/N
5310010563542
NSN
5310-01-056-3542
MFG
THE BOEING COMPANY DBA BOEING
Description
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.000 INCHES MINIMUM AND 1.030 INCHES MAXIMUM
DESIGN CONTROL REFERENCE: BACN10TS3-20
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM
HARDNESS RATING: NOT RATED
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
MANUFACTURERS CODE: 81205
MATERIAL: PLASTIC OVERALL EXCEPT THREADS
MATERIAL: STEEL THREADS
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-395 6/6 TYPE 1 CLASS 1 OR 2 FED SPEC SINGLE MATERIAL RESPONSE OVERALL EXCEPT THREADS
MOUNTING HOLE ARRANGEMENT STYLE: F57 2 HOLES
MOUNTING HOLE DIAMETER: 0.133 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
NOMINAL THREAD SIZE: 0.190 INCHES
NUT HEIGHT: ANY ACCEPTABLE
NUT LENGTH: 2.410 INCHES MINIMUM AND 2.590 INCHES MAXIMUM
NUT MOUNTING PROVISION: STRAIGHT HOLES
NUT STYLE: A129 PLATE
PLATE THICKNESS: 0.110 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
PLATE WIDTH: 1.440 INCHES MINIMUM AND 1.590 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM AND CHROMATE THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES THREADS
TEMP RATING: NOT RATED
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES: UNF
Related Searches:
4004167-01
NUT,PLAIN,RECTANGULAR
NSN, MFG P/N
5310010564071
NSN
5310-01-056-4071
MFG
RAYTHEON TECHNICAL SERVICES COMPANY
Description
HARDNESS RATING: NOT RATED
MATERIAL: STEEL OVERALL
NOMINAL THREAD SIZE: 0.190 INCHES
NUT HEIGHT: 0.143 INCHES NOMINAL
NUT LENGTH: 0.750 INCHES NOMINAL
NUT STYLE: A14 PLAIN, RECTANGULAR
NUT WIDTH: 0.422 INCHES NOMINAL
SPECIAL FEATURES: SPRING ATTACHED TO NUT
SURFACE TREATMENT: CADMIUM OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES: UNF
Related Searches:
ZSP10-099-6
NUT,PLAIN,RECTANGULAR
NSN, MFG P/N
5310010564071
NSN
5310-01-056-4071
MFG
ZERO MANUFACTURING INC . DBA ZERO CASES
Description
HARDNESS RATING: NOT RATED
MATERIAL: STEEL OVERALL
NOMINAL THREAD SIZE: 0.190 INCHES
NUT HEIGHT: 0.143 INCHES NOMINAL
NUT LENGTH: 0.750 INCHES NOMINAL
NUT STYLE: A14 PLAIN, RECTANGULAR
NUT WIDTH: 0.422 INCHES NOMINAL
SPECIAL FEATURES: SPRING ATTACHED TO NUT
SURFACE TREATMENT: CADMIUM OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES: UNF
Related Searches:
2006013
NUT,SLEEVE
NSN, MFG P/N
5310010564224
NSN
5310-01-056-4224
MFG
CM MANUFACTURING INC.
Description
CROSS-SECTIONAL SHAPE: ROUND NUT HEXAGONAL FLANGE
DESIGN CONTROL REFERENCE: 2006013-1
FLANGE THICKNESS: 0.190 INCHES NOMINAL
FLANGE WIDTH ACROSS FLATS: 2.470 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
HARDNESS RATING: NOT RATED
MANUFACTURERS CODE: 17576
MATERIAL: STEEL COMP 4130 OR STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 2.000 INCHES
NUT DIAMETER: 2.300 INCHES NOMINAL
NUT LENGTH: 0.560 INCHES NOMINAL
NUT STYLE: A33A SLEEVE
SPECIAL FEATURES: SIX SLOTS ON THE NUT END 0.133 IN. W AND 0.450 DEEP
SURFACE TREATMENT: CADMIUM AND PAINT OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY II,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-83286 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 16
THREAD SERIES: UNJ
Related Searches:
2006013-1
NUT,SLEEVE
NSN, MFG P/N
5310010564224
NSN
5310-01-056-4224
MFG
GOODRICH CORP
Description
CROSS-SECTIONAL SHAPE: ROUND NUT HEXAGONAL FLANGE
DESIGN CONTROL REFERENCE: 2006013-1
FLANGE THICKNESS: 0.190 INCHES NOMINAL
FLANGE WIDTH ACROSS FLATS: 2.470 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
HARDNESS RATING: NOT RATED
MANUFACTURERS CODE: 17576
MATERIAL: STEEL COMP 4130 OR STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 2.000 INCHES
NUT DIAMETER: 2.300 INCHES NOMINAL
NUT LENGTH: 0.560 INCHES NOMINAL
NUT STYLE: A33A SLEEVE
SPECIAL FEATURES: SIX SLOTS ON THE NUT END 0.133 IN. W AND 0.450 DEEP
SURFACE TREATMENT: CADMIUM AND PAINT OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY II,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-83286 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 16
THREAD SERIES: UNJ
Related Searches:
2006013-1
NUT,SLEEVE
NSN, MFG P/N
5310010564224
NSN
5310-01-056-4224
MFG
CM MANUFACTURING INC.
Description
CROSS-SECTIONAL SHAPE: ROUND NUT HEXAGONAL FLANGE
DESIGN CONTROL REFERENCE: 2006013-1
FLANGE THICKNESS: 0.190 INCHES NOMINAL
FLANGE WIDTH ACROSS FLATS: 2.470 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
HARDNESS RATING: NOT RATED
MANUFACTURERS CODE: 17576
MATERIAL: STEEL COMP 4130 OR STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6758 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
NOMINAL THREAD SIZE: 2.000 INCHES
NUT DIAMETER: 2.300 INCHES NOMINAL
NUT LENGTH: 0.560 INCHES NOMINAL
NUT STYLE: A33A SLEEVE
SPECIAL FEATURES: SIX SLOTS ON THE NUT END 0.133 IN. W AND 0.450 DEEP
SURFACE TREATMENT: CADMIUM AND PAINT OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY II,CL 2 FED SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE OR MIL-C-83286 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THE MANUFACTURERS DATA:
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 16
THREAD SERIES: UNJ
Related Searches:
2006012-1
WASHER,KEY
NSN, MFG P/N
5310010564225
NSN
5310-01-056-4225
MFG
GOODRICH CORP
Description
DESIGN CONTROL REFERENCE: 2006012-1
DISTANCE FROM CENTERLINE TO TOP OF INTERNAL KEY: 0.820 INCHES NOMINAL
HOLE DIAMETER: 2.015 INCHES NOMINAL
INTERNAL KEY QUANTITY: 1
INTERNAL STRAIGHT KEY WIDTH: 0.220 INCHES NOMINAL
MANUFACTURERS CODE: 17576
MATERIAL: ALUMINUM ALLOY 2024 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4,T3 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.090 INCHES NOMINAL
OUTSIDE DIAMETER: 2.860 INCHES NOMINAL
SPECIAL FEATURES: SIX DRILLED HOLES EQUALLY SPACED 0.212 IN. MIN AND 0.218 IN. MAX DIA
STYLE DESIGNATOR: 154 KEY
SURFACE TREATMENT: ANODIZE AND PAINT OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TY II,CL I MIL SPEC 1ST TREATMENT RESPONSE AND MIL-P-23377 MIL SPEC 2ND TREATMENT RESPONSE AND MIL-P-83286 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
Related Searches:
582048-1
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564226
NSN
5310-01-056-4226
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - TORRANCE
Description
DESIGN CONTROL REFERENCE: 582048-1
HOLE DIAMETER: 0.856 INCHES NOMINAL
MANUFACTURERS CODE: 70210
MATERIAL: STEEL COMP 1075 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-777 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.012 INCHES NOMINAL
OUTSIDE DIAMETER: 1.085 INCHES MINIMUM AND 1.090 INCHES MAXIMUM
OVERALL HEIGHT: 0.075 INCHES NOMINAL
THE MANUFACTURERS DATA:
Related Searches:
9359894
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564227
NSN
5310-01-056-4227
MFG
U S ARMY ARMAMENT RESEARCH & DEVELOPMENT COMMAND
Description
HOLE DIAMETER: 0.630 INCHES NOMINAL
MATERIAL: STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.061 INCHES NOMINAL
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL
OVERALL HEIGHT: 0.082 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MP-22,FSCM 93835 MFR REF SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
980136-11
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564227
NSN
5310-01-056-4227
MFG
PARKER-HANNIFIN CORPORATION DBA HYDRAULIC SYSTEMS DIVISION DIV HYDRAULIC SYSTEMS DIVISION
Description
HOLE DIAMETER: 0.630 INCHES NOMINAL
MATERIAL: STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.061 INCHES NOMINAL
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL
OVERALL HEIGHT: 0.082 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MP-22,FSCM 93835 MFR REF SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
B1250-040S
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564227
NSN
5310-01-056-4227
MFG
ASSOCIATED SPRING BARNES GROUP INC
Description
HOLE DIAMETER: 0.630 INCHES NOMINAL
MATERIAL: STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.061 INCHES NOMINAL
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL
OVERALL HEIGHT: 0.082 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MP-22,FSCM 93835 MFR REF SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
B1250-40S
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564227
NSN
5310-01-056-4227
MFG
ASSOCIATED SPRING BARNES GROUP INC
Description
HOLE DIAMETER: 0.630 INCHES NOMINAL
MATERIAL: STEEL COMP 302 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.061 INCHES NOMINAL
OUTSIDE DIAMETER: 1.250 INCHES NOMINAL
OVERALL HEIGHT: 0.082 INCHES NOMINAL
STYLE DESIGNATOR: 17 SPRING TENSION
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MP-22,FSCM 93835 MFR REF SINGLE TREATMENT RESPONSE OVERALL
Related Searches:
42499B
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564228
NSN
5310-01-056-4228
MFG
ITT CORPORATION DBA ITT AREOSPACE CONTROLS
Description
DESIGN CONTROL REFERENCE: 585185-1
HOLE DIAMETER: 0.622 INCHES MINIMUM AND 0.628 INCHES MAXIMUM
MANUFACTURERS CODE: 70210
MATERIAL: STEEL COMP 347 OR STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.007 INCHES MINIMUM AND 0.011 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.184 INCHES MINIMUM AND 1.190 INCHES MAXIMUM
OVERALL HEIGHT: 0.180 INCHES NOMINAL
THE MANUFACTURERS DATA:
Related Searches:
585185-1
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564228
NSN
5310-01-056-4228
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - TORRANCE
Description
DESIGN CONTROL REFERENCE: 585185-1
HOLE DIAMETER: 0.622 INCHES MINIMUM AND 0.628 INCHES MAXIMUM
MANUFACTURERS CODE: 70210
MATERIAL: STEEL COMP 347 OR STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.007 INCHES MINIMUM AND 0.011 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.184 INCHES MINIMUM AND 1.190 INCHES MAXIMUM
OVERALL HEIGHT: 0.180 INCHES NOMINAL
THE MANUFACTURERS DATA:
Related Searches:
42518A
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564229
NSN
5310-01-056-4229
MFG
ITT CORPORATION DBA ITT AREOSPACE CONTROLS
Description
DESIGN CONTROL REFERENCE: 585191-1
HOLE DIAMETER: 0.630 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
MANUFACTURERS CODE: 70210
MATERIAL: STEEL COMP 347 OR STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.011 INCHES MINIMUM AND 0.013 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.040 INCHES MINIMUM AND 1.060 INCHES MAXIMUM
OVERALL HEIGHT: 0.044 INCHES NOMINAL
SPECIAL FEATURES: THREE HOLES EQUALLY SPACED,0.040 IN. MIN TO 0.050 IN.MAX DIA
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
585191-1
WASHER,SPRING TENSION
NSN, MFG P/N
5310010564229
NSN
5310-01-056-4229
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE - TORRANCE
Description
DESIGN CONTROL REFERENCE: 585191-1
HOLE DIAMETER: 0.630 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
MANUFACTURERS CODE: 70210
MATERIAL: STEEL COMP 347 OR STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-5059 MIL SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS: 0.011 INCHES MINIMUM AND 0.013 INCHES MAXIMUM
OUTSIDE DIAMETER: 1.040 INCHES MINIMUM AND 1.060 INCHES MAXIMUM
OVERALL HEIGHT: 0.044 INCHES NOMINAL
SPECIAL FEATURES: THREE HOLES EQUALLY SPACED,0.040 IN. MIN TO 0.050 IN.MAX DIA
STYLE DESIGNATOR: 17 SPRING TENSION
THE MANUFACTURERS DATA:
Related Searches:
C8836-5
NUT,CLIP-ON
NSN, MFG P/N
5310010564300
NSN
5310-01-056-4300
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.176 INCHES NOMINAL
HARDNESS RATING: NOT RATED
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
LUBRICATION: DRY FILM LUBRICANT
MATERIAL: STEEL COMP 1050 OVERALL
NOMINAL THREAD SIZE: 0.138 INCHES
NUT STYLE: A399 CYLINDRICAL ANCHOR
PANEL THICKNESS: 0.066 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TEMP RATING: NOT RATED
THREAD CLASS: 3B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 32
THREAD SERIES: UNJC
