My Quote Request
No products added yet
5305-00-281-4535
20 Products
16991-3C-8
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305002814535
NSN
5305-00-281-4535
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.484 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
43S16468-12
SCREW,MACHINE
NSN, MFG P/N
5305002814180
NSN
5305-00-281-4180
MFG
NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.562 INCHES NOMINAL
HEAD DIAMETER: 0.340 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLE: A39 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: B10 SLOT
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 2S STYLE
SCREW MATERIAL: STEEL CORROSION RESISTING
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
66912-1A
SETSCREW
NSN, MFG P/N
5305002814504
NSN
5305-00-281-4504
MFG
CUMMINS INC.
Description
FASTENER LENGTH: 9.188 INCHES NOMINAL
HEAD HEIGHT: 0.438 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT STYLE: F16 CONE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 5.938 INCHES MINIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.875 INCHES NOMINAL
Related Searches:
648803
SETSCREW
NSN, MFG P/N
5305002814505
NSN
5305-00-281-4505
MFG
AM GENERAL LLC
Description
FASTENER LENGTH: 1.125 INCHES NOMINAL
HARDNESS RATING: 27.6 ROCKWELL C MINIMUM AND 33.1 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL COMP 1037 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT CHAMFER ANGLE: 10.0 DEGREES NOMINAL
POINT LENGTH: 0.312 INCHES NOMINAL
POINT STYLE: F1 FLAT
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.563 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.375 INCHES NOMINAL
Related Searches:
648803
SETSCREW
NSN, MFG P/N
5305002814505
NSN
5305-00-281-4505
MFG
AM GENERAL LLC
Description
FASTENER LENGTH: 1.125 INCHES NOMINAL
HARDNESS RATING: 27.6 ROCKWELL C MINIMUM AND 33.1 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL COMP 1037 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT CHAMFER ANGLE: 10.0 DEGREES NOMINAL
POINT LENGTH: 0.312 INCHES NOMINAL
POINT STYLE: F1 FLAT
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.563 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.375 INCHES NOMINAL
Related Searches:
8329719
SETSCREW
NSN, MFG P/N
5305002814505
NSN
5305-00-281-4505
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 1.125 INCHES NOMINAL
HARDNESS RATING: 27.6 ROCKWELL C MINIMUM AND 33.1 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL COMP 1037 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT CHAMFER ANGLE: 10.0 DEGREES NOMINAL
POINT LENGTH: 0.312 INCHES NOMINAL
POINT STYLE: F1 FLAT
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.563 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.375 INCHES NOMINAL
Related Searches:
8329719
SETSCREW
NSN, MFG P/N
5305002814505
NSN
5305-00-281-4505
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 1.125 INCHES NOMINAL
HARDNESS RATING: 27.6 ROCKWELL C MINIMUM AND 33.1 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.250 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL COMP 1037 OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
POINT CHAMFER ANGLE: 10.0 DEGREES NOMINAL
POINT LENGTH: 0.312 INCHES NOMINAL
POINT STYLE: F1 FLAT
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.563 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.375 INCHES NOMINAL
Related Searches:
8F3374
SETSCREW
NSN, MFG P/N
5305002814507
NSN
5305-00-281-4507
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
SETSCREW
Related Searches:
X1680
SETSCREW
NSN, MFG P/N
5305002814524
NSN
5305-00-281-4524
MFG
HME INC.
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD HEIGHT: 0.375 INCHES NOMINAL
HEAD STYLE: C13 SQUARE
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT STYLE: F19 FLAT
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
X1680
SETSCREW
NSN, MFG P/N
5305002814524
NSN
5305-00-281-4524
MFG
AXLETECH INTERNATIONAL INC.
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD HEIGHT: 0.375 INCHES NOMINAL
HEAD STYLE: C13 SQUARE
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT STYLE: F19 FLAT
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
X1680
SETSCREW
NSN, MFG P/N
5305002814524
NSN
5305-00-281-4524
MFG
MERITOR HEAVY VEHICLE SYSTEMS LLC
Description
FASTENER LENGTH: 1.250 INCHES NOMINAL
HEAD HEIGHT: 0.375 INCHES NOMINAL
HEAD STYLE: C13 SQUARE
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
POINT STYLE: F19 FLAT
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.250 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.500 INCHES NOMINAL
Related Searches:
201566
SETSCREW
NSN, MFG P/N
5305002814529
NSN
5305-00-281-4529
MFG
KOMATSU AMERICA INTL CO
Description
FASTENER LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.156 INCHES NOMINAL
HEAD STYLE: C13 SQUARE
HOLE CONFIGURATION STYLE: E15 SQUARE LONGITUDINAL HOLE
HOLE DIAMETER: 0.064 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D21 W/O INTERNAL DRIVE
MATERIAL: STEEL COMP 1020 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
POINT CHAMFER ANGLE: 14.0 DEGREES MINIMUM AND 15.0 DEGREES MAXIMUM
POINT LENGTH: 0.362 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
POINT STYLE: F1 FLAT
SPECIAL FEATURES: THREAD RELIEVED 0.328 IN. DIA BY 0.062 IN. LG UNDER HEAD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.314 INCHES MINIMUM AND 0.326 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.375 INCHES NOMINAL
Related Searches:
7002872
SETSCREW
NSN, MFG P/N
5305002814531
NSN
5305-00-281-4531
MFG
U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD HEIGHT: 0.124 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1213 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.600 INCHES NOMINAL
Related Searches:
SC1004
SETSCREW
NSN, MFG P/N
5305002814531
NSN
5305-00-281-4531
MFG
AMBAC INTERNATIONAL CORPORATION
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD HEIGHT: 0.124 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1213 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.600 INCHES NOMINAL
Related Searches:
SC1004CA
SETSCREW
NSN, MFG P/N
5305002814531
NSN
5305-00-281-4531
MFG
UNITED TECHNOLOGIES CORP ELECTRO SYSTEMS INC
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD HEIGHT: 0.124 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1213 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.600 INCHES NOMINAL
Related Searches:
SC1004CA
SETSCREW
NSN, MFG P/N
5305002814531
NSN
5305-00-281-4531
MFG
AMBAC INTERNATIONAL CORPORATION
Description
FASTENER LENGTH: 0.188 INCHES NOMINAL
HEAD HEIGHT: 0.124 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL DRIVE STYLE: D14 SLOT
MATERIAL: STEEL COMP 1213 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.164 INCHES
POINT STYLE: F19 FLAT
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.188 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.600 INCHES NOMINAL
Related Searches:
5305002814535
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305002814535
NSN
5305-00-281-4535
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.484 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
55&0042&3
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305002814535
NSN
5305-00-281-4535
MFG
GRIMES AEROSPACE COMPANY DBA HONEYWELL
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.484 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
593-6961210 PC
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305002814535
NSN
5305-00-281-4535
MFG
NAVAL SEA SYSTEMS COMMAND
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.484 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
Related Searches:
593-6961210 PC29
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305002814535
NSN
5305-00-281-4535
593-6961210 PC29
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305002814535
NSN
5305-00-281-4535
MFG
NAVAL SEA SYSTEMS COMMAND
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.500 INCHES NOMINAL
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.359 INCHES MINIMUM AND 0.411 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.484 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.125 INCHES NOMINAL
