My Quote Request
No products added yet
5935-00-995-1394
20 Products
SM-B-601712
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
SM-B-601712
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
MFG
US ARMY COMMUNICATIONS & ELECTRONICS MATERIEL READINESS COMMAND LOGISTICS ENGINEERING DIR
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.257 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: COMPRESSION NUT
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.005 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC SINGLE MATING END
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 0.500 INCHES
OVERALL DIAMETER: 0.580 INCHES NOMINAL
OVERALL LENGTH: 1.050 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL: COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
RFK37-3-22C1
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950888
NSN
5935-00-995-0888
RFK37-3-22C1
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950888
NSN
5935-00-995-0888
MFG
ITT CORPORATION DBA I T T CANNON
Description
BODY STYLE: 9A STRAIGHT SHAPE, INTERNAL COUPLING W/BACKSHELL
CABLE ENTRANCE DIAMETER: 1.064 INCHES NOMINAL
CONNECTOR CABLE STRAIN RELIEF METHOD: CABLE CLAMP
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED COUPLING RING
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 10.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: BPAH FK-37 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: SILVER SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.037 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 37 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC PHENOLIC SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.438 INCHES
NOMINAL THREAD SIZE: 1.938 INCHES
OVERALL DIAMETER: 2.125 INCHES NOMINAL
OVERALL LENGTH: 2.312 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: PASSIVATE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UN
THREADED DEVICE TYPE: COUPLING FACILITY
Related Searches:
FK37-3-23C7-8
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950890
NSN
5935-00-995-0890
FK37-3-23C7-8
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950890
NSN
5935-00-995-0890
MFG
ITT CORPORATION DBA I T T CANNON
Description
BODY ANGLE IN DEG: 90.0
CABLE ENTRANCE DIAMETER: 0.875 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: CABLE CLAMP
CONTACT MAXIMUM CURRENT RATING IN AMPS: 10.0 SINGLE MATING END SINGLE CONTACT GROUPING
DESIGN CONTROL REFERENCE: FK37-3-23C7-8
INCLUDED CONTACT QUANTITY: 37 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC SINGLE MATING END
MANUFACTURERS CODE: 71468
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 1.812 INCHES
OVERALL HEIGHT: 2.156 INCHES NOMINAL
OVERALL LENGTH: 2.734 INCHES NOMINAL
OVERALL WIDTH: 2.344 INCHES NOMINAL
SHELL MATERIAL: ALUMINUM ALLOY
SHELL TYPE: SOLID
THE MANUFACTURERS DATA:
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UN
THREADED DEVICE TYPE: COUPLING FACILITY
Related Searches:
9102114
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950894
NSN
5935-00-995-0894
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
BODY ANGLE IN DEG: 90.0
BODY STYLE: 15A ANGLE SHAPE W/CABLE CLAMP
CABLE ENTRANCE DIAMETER: 0.516 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: CABLE CLAMP
CONNECTOR LOCKING METHOD: INTERNALLY THREADED COUPLING RING
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS: 10.0 SINGLE MATING END 1ST CONTACT GROUPING 30.0 SINGLE MATING END 2ND CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ADCL WK-C3 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT: SILVER SINGLE MATING END ALL CONTACT GROUPINGS
DESIGN CONTROL REFERENCE: WK-C3-23C1/2
DISTANCE FROM CENTERLINE TO CABLE END: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
DISTANCE FROM CENTERLINE TO CONNECTOR END: 1.438 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.003 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END 1ST CONTACT GROUPING 2 SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INSERT MATERIAL: PAPER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 2A589
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.438 INCHES
NOMINAL THREAD SIZE: 0.875 INCHES
OVERALL DIAMETER: 1.031 INCHES MINIMUM AND 1.047 INCHES MAXIMUM
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE: SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
THE MANUFACTURERS DATA:
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNS
THREADED DEVICE TYPE: COUPLING FACILITY
Related Searches:
WK-C3-23C1/2
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950894
NSN
5935-00-995-0894
WK-C3-23C1/2
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950894
NSN
5935-00-995-0894
MFG
PEI/ GENESIS INC.
Description
BODY ANGLE IN DEG: 90.0
BODY STYLE: 15A ANGLE SHAPE W/CABLE CLAMP
CABLE ENTRANCE DIAMETER: 0.516 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: CABLE CLAMP
CONNECTOR LOCKING METHOD: INTERNALLY THREADED COUPLING RING
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS: 10.0 SINGLE MATING END 1ST CONTACT GROUPING 30.0 SINGLE MATING END 2ND CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ADCL WK-C3 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT: SILVER SINGLE MATING END ALL CONTACT GROUPINGS
DESIGN CONTROL REFERENCE: WK-C3-23C1/2
DISTANCE FROM CENTERLINE TO CABLE END: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
DISTANCE FROM CENTERLINE TO CONNECTOR END: 1.438 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.003 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END 1ST CONTACT GROUPING 2 SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INSERT MATERIAL: PAPER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 2A589
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.438 INCHES
NOMINAL THREAD SIZE: 0.875 INCHES
OVERALL DIAMETER: 1.031 INCHES MINIMUM AND 1.047 INCHES MAXIMUM
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE: SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
THE MANUFACTURERS DATA:
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNS
THREADED DEVICE TYPE: COUPLING FACILITY
Related Searches:
WKC3-3-23C1-2
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950894
NSN
5935-00-995-0894
WKC3-3-23C1-2
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009950894
NSN
5935-00-995-0894
MFG
ITT CORPORATION DBA I T T CANNON
Description
BODY ANGLE IN DEG: 90.0
BODY STYLE: 15A ANGLE SHAPE W/CABLE CLAMP
CABLE ENTRANCE DIAMETER: 0.516 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: CABLE CLAMP
CONNECTOR LOCKING METHOD: INTERNALLY THREADED COUPLING RING
CONTACT MATERIAL: COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT MAXIMUM CURRENT RATING IN AMPS: 10.0 SINGLE MATING END 1ST CONTACT GROUPING 30.0 SINGLE MATING END 2ND CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ADCL WK-C3 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT: SILVER SINGLE MATING END ALL CONTACT GROUPINGS
DESIGN CONTROL REFERENCE: WK-C3-23C1/2
DISTANCE FROM CENTERLINE TO CABLE END: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
DISTANCE FROM CENTERLINE TO CONNECTOR END: 1.438 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
III PRECIOUS MATERIAL: SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.003 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END 1ST CONTACT GROUPING 2 SINGLE MATING END 2ND CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INSERT MATERIAL: PAPER SINGLE MATING END
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 2A589
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.438 INCHES
NOMINAL THREAD SIZE: 0.875 INCHES
OVERALL DIAMETER: 1.031 INCHES MINIMUM AND 1.047 INCHES MAXIMUM
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE: SOLDER WELL SINGLE MATING END ALL CONTACT GROUPINGS
THE MANUFACTURERS DATA:
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 6
THREAD SERIES DESIGNATOR: UNS
THREADED DEVICE TYPE: COUPLING FACILITY
Related Searches:
572032-1
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951126
NSN
5935-00-995-1126
572032-1
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951126
NSN
5935-00-995-1126
MFG
HONEYWELL INTERNATIONAL INC. DBA HONEYWELL DIV AEROSPACE - PHOENIX
Description
BODY STYLE: 1G STRAIGHT SHAPE, EXTERNAL COUPLING
INCLUDED CONTACT QUANTITY: 4 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.620 INCHES
OVERALL HEIGHT: 2.220 INCHES MINIMUM AND 2.280 INCHES MAXIMUM
OVERALL WIDTH: 2.220 INCHES MINIMUM AND 2.280 INCHES MAXIMUM
Related Searches:
0736982
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951320
NSN
5935-00-995-1320
0736982
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951320
NSN
5935-00-995-1320
MFG
MOWAG AG
Description
BODY STYLE: 1G STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 1.250 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 1250.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 245.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 1750.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABAN 22-7 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102R22-7P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 1.250 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION PROOF
III PRECIOUS MATERIAL: GOLD AND SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.001 GOLD GRAINS, TROY AND 0.001 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.625 INCHES
NOMINAL THREAD SIZE: 1.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-5015
OVERALL HEIGHT: 1.625 INCHES NOMINAL
OVERALL LENGTH: 1.938 INCHES MAXIMUM
OVERALL WIDTH: 1.625 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-C-5015 GOVERNMENT SPECIFICATION
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
176743-77
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951320
NSN
5935-00-995-1320
176743-77
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951320
NSN
5935-00-995-1320
MFG
ESW GMBH
Description
BODY STYLE: 1G STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 1.250 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 1250.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 245.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 1750.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABAN 22-7 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102R22-7P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 1.250 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION PROOF
III PRECIOUS MATERIAL: GOLD AND SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.001 GOLD GRAINS, TROY AND 0.001 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.625 INCHES
NOMINAL THREAD SIZE: 1.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-5015
OVERALL HEIGHT: 1.625 INCHES NOMINAL
OVERALL LENGTH: 1.938 INCHES MAXIMUM
OVERALL WIDTH: 1.625 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-C-5015 GOVERNMENT SPECIFICATION
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
4162-5014
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951320
NSN
5935-00-995-1320
4162-5014
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951320
NSN
5935-00-995-1320
MFG
JAIDINGER MFG. CO. INC. DBA JAICO PRODUCTS
Description
BODY STYLE: 1G STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 1.250 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 1250.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 245.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 1750.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABAN 22-7 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102R22-7P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 1.250 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION PROOF
III PRECIOUS MATERIAL: GOLD AND SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.001 GOLD GRAINS, TROY AND 0.001 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.625 INCHES
NOMINAL THREAD SIZE: 1.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-5015
OVERALL HEIGHT: 1.625 INCHES NOMINAL
OVERALL LENGTH: 1.938 INCHES MAXIMUM
OVERALL WIDTH: 1.625 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-C-5015 GOVERNMENT SPECIFICATION
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
MS3102R22-7P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951320
NSN
5935-00-995-1320
MS3102R22-7P
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951320
NSN
5935-00-995-1320
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 1G STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 1.250 INCHES NOMINAL
CONNECTOR LOCKING METHOD: EXTERNALLY THREADED SHELL
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 1250.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM CURRENT RATING IN AMPS: 245.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 1750.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABAN 22-7 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD AND SILVER SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3102R22-7P
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 1.250 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION PROOF
III PRECIOUS MATERIAL: GOLD AND SILVER
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD AND CONTACT SURFACES SILVER
III PRECIOUS MATERIAL AND WEIGHT: 0.001 GOLD GRAINS, TROY AND 0.001 SILVER GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD LENGTH: 0.625 INCHES
NOMINAL THREAD SIZE: 1.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-5015
OVERALL HEIGHT: 1.625 INCHES NOMINAL
OVERALL LENGTH: 1.938 INCHES MAXIMUM
OVERALL WIDTH: 1.625 INCHES NOMINAL
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 81349-MIL-C-5015 GOVERNMENT SPECIFICATION
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-5015 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
Related Searches:
MS3110E20-16S
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951325
NSN
5935-00-995-1325
MS3110E20-16S
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935009951325
NSN
5935-00-995-1325
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 3G STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 1.156 INCHES NOMINAL
CONNECTOR LOCKING METHOD: BAYONET PIN
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS: 1000.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ASAD 20-16 SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204,TY 1,CL 1,GRADE C MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,GRADE E FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3110E20-16S
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 1.156 INCHES NOMINAL
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.556 INCHES MINIMUM AND 0.587 INCHES MAXIMUM
ENVIRONMENTAL PROTECTION: MOISTURE RESISTANT AND SALT WATER RESISTANT AND VIBRATION PROOF
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.016 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 16 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT POSITION IN DEG: 0.0
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 1.188 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MIL-C-26482
OVERALL HEIGHT: 1.453 INCHES MAXIMUM
OVERALL LENGTH: 1.531 INCHES MAXIMUM
OVERALL WIDTH: 1.453 INCHES MAXIMUM
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SHELL SURFACE TREATMENT: CADMIUM
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE
SHELL TYPE: SOLID
SPEC/STD CONTROLLING DATA:
SPECIFICATION/STANDARD DATA: 96906-MS3110 GOVERNMENT STANDARD
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT: 81349-MIL-C-26482 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
UNTHREADED MOUNTING HOLE DIAMETER: 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
Related Searches:
131872
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
MFG
NORTHROP GRUMMAN GUIDANCE AND ELECTRONICS COMPANY INC. DBA NAVIGATION SYSTEMS DIVISION DIV NAVIGATION SYSTEMS DIVISION
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.257 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: COMPRESSION NUT
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.005 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC SINGLE MATING END
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 0.500 INCHES
OVERALL DIAMETER: 0.580 INCHES NOMINAL
OVERALL LENGTH: 1.050 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL: COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
2613365-1
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
MFG
ALLIANT TECHSYSTEMS INC . DIV DEFENSE ELECTRONICS SYSTEMS
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.257 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: COMPRESSION NUT
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.005 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC SINGLE MATING END
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 0.500 INCHES
OVERALL DIAMETER: 0.580 INCHES NOMINAL
OVERALL LENGTH: 1.050 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL: COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
5051
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
MFG
ITT CANNON RF PRODUCTS
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.257 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: COMPRESSION NUT
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.005 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC SINGLE MATING END
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 0.500 INCHES
OVERALL DIAMETER: 0.580 INCHES NOMINAL
OVERALL LENGTH: 1.050 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL: COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
58-007-3196
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
58-007-3196
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
MFG
CHICAGO CASTER AND EQUIPMENT CO INC DIV OF ALBION ALLEN INC
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.257 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: COMPRESSION NUT
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.005 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC SINGLE MATING END
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 0.500 INCHES
OVERALL DIAMETER: 0.580 INCHES NOMINAL
OVERALL LENGTH: 1.050 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL: COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
6500-1071-002
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
6500-1071-002
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
MFG
RADIALL USA, INC.
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.257 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: COMPRESSION NUT
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.005 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC SINGLE MATING END
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 0.500 INCHES
OVERALL DIAMETER: 0.580 INCHES NOMINAL
OVERALL LENGTH: 1.050 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL: COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
922387-2
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935009951394
NSN
5935-00-995-1394
MFG
RAYTHEON COMPANY
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.257 INCHES MAXIMUM
CONNECTOR CABLE STRAIN RELIEF METHOD: COMPRESSION NUT
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT MATERIAL: COPPER SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT REMOVABILITY: NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT SURFACES GOLD
III PRECIOUS MATERIAL AND WEIGHT: 0.005 GOLD GRAINS, TROY
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL: PLASTIC SINGLE MATING END
MATING END QUANTITY: 1
NOMINAL THREAD SIZE: 0.500 INCHES
OVERALL DIAMETER: 0.580 INCHES NOMINAL
OVERALL LENGTH: 1.050 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL MATERIAL: COPPER ALLOY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22,1/2 H FED SPEC SINGLE MATERIAL RESPONSE
SHELL TYPE: SOLID
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
THREADED DEVICE TYPE: BACK SHELL
Related Searches:
10125334
RETAINER,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935009951647
NSN
5935-00-995-1647
10125334
RETAINER,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935009951647
NSN
5935-00-995-1647
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 2.625 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
MATERIAL: STEEL
MOUNTING FACILITY TYPE AND QUANTITY: 2 UNTHREADED HOLE SINGLE MOUNTING FACILITY
OVERALL HEIGHT: 0.129 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
OVERALL LENGTH: 2.893 INCHES MINIMUM AND 2.923 INCHES MAXIMUM
OVERALL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
STYLE DESIGNATOR: 1C RECTANGULAR PRISM
UNTHREADED MOUNTING HOLE DIAMETER: 0.093 INCHES NOMINAL SINGLE MOUNTING FACILITY
Related Searches:
10376-4
RETAINER,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935009951647
NSN
5935-00-995-1647
10376-4
RETAINER,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935009951647
NSN
5935-00-995-1647
MFG
ALLIANT TECHSYSTEMS INC . DIV DEFENSE ELECTRONICS SYSTEMS
Description
DISTANCE BETWEEN MOUNTING FACILITY CENTERS: 2.625 INCHES NOMINAL SINGLE MOUNTING FACILITY SINGLE CENTER GROUP
MATERIAL: STEEL
MOUNTING FACILITY TYPE AND QUANTITY: 2 UNTHREADED HOLE SINGLE MOUNTING FACILITY
OVERALL HEIGHT: 0.129 INCHES MINIMUM AND 0.159 INCHES MAXIMUM
OVERALL LENGTH: 2.893 INCHES MINIMUM AND 2.923 INCHES MAXIMUM
OVERALL WIDTH: 0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
STYLE DESIGNATOR: 1C RECTANGULAR PRISM
UNTHREADED MOUNTING HOLE DIAMETER: 0.093 INCHES NOMINAL SINGLE MOUNTING FACILITY
