My Quote Request
No products added yet
5306-01-323-9637
20 Products
64-001-1234-4
BOLT,MACHINE
NSN, MFG P/N
5306013239637
NSN
5306-01-323-9637
MFG
BRAUER AEROSPACE PRODUCTS INC
Description
FASTENER LENGTH: 9.500 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
HEAD HEIGHT: 0.750 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
NOMINAL THREAD DIAMETER: 0.750 INCHES
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 9.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
Related Searches:
MS20074-08-36
BOLT,MACHINE
NSN, MFG P/N
5306013238966
NSN
5306-01-323-8966
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS20074-08-36
FASTENER LENGTH: 3.781 INCHES MINIMUM AND 3.828 INCHES MAXIMUM
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 2.984 INCHES MINIMUM AND 3.016 INCHES MAXIMUM
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E5 HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.075 INCHES MAXIMUM
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
MANUFACTURERS CODE: 96906
MATERIAL: STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4037 OR STEEL COMP 4140 OR STEEL COMP 5015 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.765 INCHES MINIMUM
THREAD QUANTITY PER INCH: 13
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.741 INCHES MINIMUM AND 0.751 INCHES MAXIMUM
Related Searches:
471661 ITEM7
BOLT,U
NSN, MFG P/N
5306013238967
NSN
5306-01-323-8967
MFG
GENERAL MOTORS LLC DBA GENERAL MOTORS
Description
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 13.720 INCHES MINIMUM AND 13.780 INCHES MAXIMUM
INSIDE DISTANCE BETWEEN SHANKS: 2.520 INCHES MINIMUM AND 2.580 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 32000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
STYLE DESIGNATOR: B31 SQUARE BEND
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.500 INCHES MINIMUM AND 2.560 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNRF
Related Searches:
471661 ITEM7
BOLT,U
NSN, MFG P/N
5306013238967
NSN
5306-01-323-8967
MFG
GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
Description
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 13.720 INCHES MINIMUM AND 13.780 INCHES MAXIMUM
INSIDE DISTANCE BETWEEN SHANKS: 2.520 INCHES MINIMUM AND 2.580 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 32000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
STYLE DESIGNATOR: B31 SQUARE BEND
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.500 INCHES MINIMUM AND 2.560 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNRF
Related Searches:
471663
BOLT,U
NSN, MFG P/N
5306013238967
NSN
5306-01-323-8967
MFG
GENERAL MOTORS LLC DBA GENERAL MOTORS
Description
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 13.720 INCHES MINIMUM AND 13.780 INCHES MAXIMUM
INSIDE DISTANCE BETWEEN SHANKS: 2.520 INCHES MINIMUM AND 2.580 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 32000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
STYLE DESIGNATOR: B31 SQUARE BEND
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.500 INCHES MINIMUM AND 2.560 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNRF
Related Searches:
471663
BOLT,U
NSN, MFG P/N
5306013238967
NSN
5306-01-323-8967
MFG
GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT
Description
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 13.720 INCHES MINIMUM AND 13.780 INCHES MAXIMUM
INSIDE DISTANCE BETWEEN SHANKS: 2.520 INCHES MINIMUM AND 2.580 INCHES MAXIMUM
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 GR5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 32000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
STYLE DESIGNATOR: B31 SQUARE BEND
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.500 INCHES MINIMUM AND 2.560 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 18
THREAD SERIES DESIGNATOR: UNRF
Related Searches:
8875T34
BOLT,U
NSN, MFG P/N
5306013238968
NSN
5306-01-323-8968
Description
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 3.750 INCHES NOMINAL
INSIDE DISTANCE BETWEEN SHANKS: 1.750 INCHES NOMINAL
MATERIAL: STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIAL FEATURES: FURNISHED WITH FOUR HEX NUTS
STYLE DESIGNATOR: B30 ROUND BEND
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
Related Searches:
8889T44
BOLT,U
NSN, MFG P/N
5306013238968
NSN
5306-01-323-8968
Description
DISTANCE FROM INSIDE CENTER OF BEND TO BOLT END: 3.750 INCHES NOMINAL
INSIDE DISTANCE BETWEEN SHANKS: 1.750 INCHES NOMINAL
MATERIAL: STEEL COMP 304 OVERALL
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIAL FEATURES: FURNISHED WITH FOUR HEX NUTS
STYLE DESIGNATOR: B30 ROUND BEND
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.500 INCHES NOMINAL
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
Related Searches:
NAS6304A8
BOLT,SHEAR
NSN, MFG P/N
5306013238969
NSN
5306-01-323-8969
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.855 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
HEAD HEIGHT: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS6304 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: ALUMINUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.370 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
NAS6808U16
BOLT,SHEAR
NSN, MFG P/N
5306013238970
NSN
5306-01-323-8970
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.720 INCHES MINIMUM AND 1.750 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS6808 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.735 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
Related Searches:
4076771
BOLT,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5306013239084
NSN
5306-01-323-9084
4076771
BOLT,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5306013239084
NSN
5306-01-323-9084
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
DESIGN CONTROL REFERENCE: 4076771
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.556 INCHES MINIMUM AND 0.576 INCHES MAXIMUM
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER: 0.726 INCHES NOMINAL
EXTENDED WASHER DIAMETER: 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.050 INCHES NOMINAL
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 0.961 INCHES MINIMUM AND 0.981 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.244 INCHES MINIMUM AND 0.246 INCHES MAXIMUM
HARDNESS RATING: 24.0 ROCKWELL C MINIMUM OVERALL
HEAD HEIGHT: 0.248 INCHES MINIMUM AND 0.268 INCHES MAXIMUM
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
III END ITEM IDENTIFICATION: F100PW0229 ENGINE
MANUFACTURERS CODE: 77445
MATERIAL: STEEL CORROSION RESISTING OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7477 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SECOND DIAMETER FROM HEAD: 0.142 INCHES MINIMUM AND 0.146 INCHES MAXIMUM
SPECIAL FEATURES: CENTER HOLE ON TOP OF HEAD 0.090/0.110 IN. DIA X 0.128 IN. NOM DEEP
SURFACE TREATMENT: CHROMIUM GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2406 ASSN STD SINGLE TREATMENT RESPONSE GRIP
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.245 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.250 INCHES NOMINAL
Related Searches:
4059992
BOLT,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5306013239085
NSN
5306-01-323-9085
4059992
BOLT,EXTERNALLY RELIEVED BODY
NSN, MFG P/N
5306013239085
NSN
5306-01-323-9085
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
DESIGN CONTROL REFERENCE: 4059992
DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER: 0.855 INCHES NOMINAL
EXTENDED WASHER DIAMETER: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
EXTERNALLY RELIEVED BODY DIAMETER QUANTITY: 1
FASTENER LENGTH: 1.190 INCHES MINIMUM AND 1.210 INCHES MAXIMUM
FIRST DIAMETER FROM HEAD: 0.181 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE: E2 DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
III END ITEM IDENTIFICATION: F100PW0229 ENGINE
MANUFACTURERS CODE: 77445
MATERIAL: TITANIUM ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7461 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: THREADED AREA IS NEXT TO HEAD;EX-TERNALLY RELIEVED AREA IS A DOWL-LIKE PROJECTION BETWEEN THREADS AND TIP;CENTER HOLE AT TOP OF HEAD IS 0.140/0.160IN. DIA X 0.167 IN. NOM DEEP
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.250 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.3125 INCHES NOMINAL
Related Searches:
4071145
BOLT,SHOULDER
NSN, MFG P/N
5306013239204
NSN
5306-01-323-9204
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
CHAMFER ANGLE: 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
DESIGN CONTROL REFERENCE: 4071145
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 2.590 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 2.755 INCHES MINIMUM AND 2.775 INCHES MAXIMUM
HEAD HEIGHT: 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
HEAD LENGTH: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD STYLE: C22 TEE NO. 6
III END ITEM IDENTIFICATION: F100PW0229 ENGINE
MANUFACTURERS CODE: 77445
MATERIAL: NICKEL ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7471 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER: 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 1.895 INCHES MINIMUM AND 1.905 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.452 INCHES NOMINAL
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.375 INCHES NOMINAL
Related Searches:
NAS6604DH26
BOLT,SHEAR
NSN, MFG P/N
5306013239629
NSN
5306-01-323-9629
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.847 INCHES MINIMUM AND 1.897 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 2.035 INCHES MINIMUM AND 2.065 INCHES MAXIMUM
GRIP DIAMETER: 0.2445 INCHES MINIMUM AND 0.2450 INCHES MAXIMUM
GRIP LENGTH: 1.615 INCHES MINIMUM AND 1.635 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
HOLE CONFIGURATION STYLE: E4 HEXAGON CORNERS
HOLE DIAMETER: 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA: 80205-NAS6604 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.400 INCHES MINIMUM AND 0.450 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
1J6749
BOLT,EYE
NSN, MFG P/N
5306013239638
NSN
5306-01-323-9638
MFG
CATERPILLAR INC. DBA CATERPILLAR DIV GOVERNMENTAL AND DEFENSE PRODUCTS
Description
BOLT,EYE
Related Searches:
PWA14175-4
BOLT,EYE
NSN, MFG P/N
5306013239639
NSN
5306-01-323-9639
MFG
UNITED TECHNOLOGIES CORPORATION DBA PRATT & WHITNEY DIV SPARES/SUPPORT EQUIPMENT
Description
COLOR: BLACK OVERALL
EYE INSIDE DIAMETER: 0.375 INCHES NOMINAL
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
OVERALL LENGTH: 2.500 INCHES NOMINAL
STYLE DESIGNATOR: B11 ROUND, CLOSED W/SHOULDER
SURFACE TREATMENT: OXIDE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
IT1026HT-4
BOLT,INTERNALLY RELIEVED BODY
NSN, MFG P/N
5306013239641
NSN
5306-01-323-9641
IT1026HT-4
BOLT,INTERNALLY RELIEVED BODY
NSN, MFG P/N
5306013239641
NSN
5306-01-323-9641
MFG
EATON AEROSPACE LLC DIV ELECTRICAL SENSING & CONTROLS
Description
COLOR: BLACK OVERALL
FASTENER LENGTH: 2.500 INCHES NOMINAL
FEATURES PROVIDED: WASHER AND DRY FILM LUBRICANT
HEAD HEIGHT: 0.312 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL THREAD CLASS: 2B CONCENTRIC HOLE
INTERNAL THREAD DIRECTION: RIGHT-HAND CONCENTRIC HOLE
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NOMINAL THREAD SIZE: 0.112 INCHES CONCENTRIC HOLE
SPECIAL FEATURES: FURNISH WITH NUT,FRICTION WASHER,NOSE PIECE,SLEEVE AND SETSCREW P/N F1T7315 CAGEC 58998; HEX DRIVE 0.375 IN. DIA
STYLE DESIGNATOR: B41A CONCENTRIC HOLE THREADED
SURFACE TREATMENT: OXIDE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.400 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES: UNC CONCENTRIC HOLE
THREAD SERIES DESIGNATOR: UNF
THREADS PER INCH: 40 CONCENTRIC HOLE
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
IT1026HT-4
BOLT,INTERNALLY RELIEVED BODY
NSN, MFG P/N
5306013239641
NSN
5306-01-323-9641
IT1026HT-4
BOLT,INTERNALLY RELIEVED BODY
NSN, MFG P/N
5306013239641
NSN
5306-01-323-9641
MFG
FASTENER INNOVATION TECHNOLOGY INC DBA F.I.T.
Description
COLOR: BLACK OVERALL
FASTENER LENGTH: 2.500 INCHES NOMINAL
FEATURES PROVIDED: WASHER AND DRY FILM LUBRICANT
HEAD HEIGHT: 0.312 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
INTERNAL THREAD CLASS: 2B CONCENTRIC HOLE
INTERNAL THREAD DIRECTION: RIGHT-HAND CONCENTRIC HOLE
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.500 INCHES
NOMINAL THREAD SIZE: 0.112 INCHES CONCENTRIC HOLE
SPECIAL FEATURES: FURNISH WITH NUT,FRICTION WASHER,NOSE PIECE,SLEEVE AND SETSCREW P/N F1T7315 CAGEC 58998; HEX DRIVE 0.375 IN. DIA
STYLE DESIGNATOR: B41A CONCENTRIC HOLE THREADED
SURFACE TREATMENT: OXIDE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 2.400 INCHES MINIMUM AND 2.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES: UNC CONCENTRIC HOLE
THREAD SERIES DESIGNATOR: UNF
THREADS PER INCH: 40 CONCENTRIC HOLE
WIDTH BETWEEN FLATS: 0.750 INCHES NOMINAL
Related Searches:
NAS6808U20
BOLT,SHEAR
NSN, MFG P/N
5306013239642
NSN
5306-01-323-9642
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.970 INCHES MINIMUM AND 2.000 INCHES MAXIMUM
GRIP DIAMETER: 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH: 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
HEAD HEIGHT: 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.500 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS6808 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.735 INCHES NOMINAL
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
Related Searches:
12-D-0108
ROD,THREADED END
NSN, MFG P/N
5306013239966
NSN
5306-01-323-9966
MFG
BORG-WARNER CORP MARVEL-SCHEBLER/TILLOTSON DIV
Description
CRITICALITY CODE JUSTIFICATION: ZZZY
DESIGN CONTROL REFERENCE: 12-D-0108
MANUFACTURERS CODE: 96152
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: MATERIAL WILL BE IN ACCORDANCE WITH SHIPS PARTS CONTROL CENTER ACTIVITY HX QUALITY CONTROL,MANUFACTURING AND TESTING SPECIFICATIONS
THE MANUFACTURERS DATA:
