My Quote Request
No products added yet
6520-01-333-4150
20 Products
F90K414
DISK,ABRASIVE
NSN, MFG P/N
6520013334150
NSN
6520-01-333-4150
MFG
AIR FORCE MEDICAL LOGISTICS OFFICE
Description
ABRASIVE MATERIAL: ALUMINUM OXIDE
III PART NAME ASSIGNED BY CONTROLLING AGENCY: DISK ABRASIVE ALUMINUM OXIDE DENTAL 10000RPM 0.5IN COARSE 10S
MAXIMUM SPEED RATING IN RPM: 10000.0
OUTSIDE DIAMETER: 0.500 INCHES NOMINAL
SPECIAL FEATURES: 85SOF-LEX XT POP ON; COARSE; RND EYELET DESIGN; PATENTED FLEXIBLE BACKING; COLOR CODED; F/POLISHING AND CONTOURING; UNIT QTY 10
USAGE DESIGN: DENTAL
Related Searches:
030657
OPERATING AND TREAT
NSN, MFG P/N
6520013335961
NSN
6520-01-333-5961
MFG
FORT DEFIANCE INDUSTRIES INC.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: PORTABLE (**), AIR OPERATED WITH CARRYING CASE. C/O: TRIPLEX SYRINGE, HIGH VELOCITY ORAL EVACUATOR SYSTEM, SALIVA EJECTOR, WATER SUPPLY TANK, WASTE COLLECTOR TANK, FOOT CONTROLLER, THREE ORAL EVACUATOR TIPS, ONE DRY CUSPIDOR, TWO COILED HANDPIECE HOSES,
III EXTERIOR CONTAINER WEIGHT: 72.00 POUNDS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: DENTAL OPERATING AND TREATMENT UNIT FIELD:
III UNIT OF ISSUE CUBE: 2.80 CUBIC FEET
SPECIAL FEATURES: (**) THIS ITEM IS PORTABLE UNTIL IT IS UNPACKED AND SET UP, THEN IT CAN BE EITHER STATIONARY OR MOBILE (FOUR BALL CASTERS ARE SUPPLY WITH THIS ITEM).
~1: ONE HIGH SPEED CONTRA-ANGLE HANDPIECE, 6520-01-386-8295, ONE LOW SPEED STRAIGHT HANDPIECE, 6520-00-138-2308, ONE ROTATING QUICK DISCONNECT NON-FIBEROPTIC HANDPIECE COUPLER, 6520-01-387-0030, A CABINET TOP CAPABLE OF NESTING A REMOVABLE TRAY,
~2: 6530-00-926-9170 OR 6530-00-794-0600, AND ONE ACCESSORY KIT. USED WITH COMPRESSOR-DEHYDRATOR 6520-00-129-1246 AND ULTRASONIC PROPHYLAXIS UNIT 6520-01-142-8228. FOR RESTORATIVE DENTISTRY IN THE FIELD. FOR SUCTION APPARATUS TIP ORDER: 6520-01-131-7922,
~3: 6520-01-131-7924, OR 6520-01-185-2532.
Related Searches:
030657 W/PROVISIONING
OPERATING AND TREAT
NSN, MFG P/N
6520013335961
NSN
6520-01-333-5961
030657 W/PROVISIONING
OPERATING AND TREAT
NSN, MFG P/N
6520013335961
NSN
6520-01-333-5961
MFG
FORT DEFIANCE INDUSTRIES INC.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: PORTABLE (**), AIR OPERATED WITH CARRYING CASE. C/O: TRIPLEX SYRINGE, HIGH VELOCITY ORAL EVACUATOR SYSTEM, SALIVA EJECTOR, WATER SUPPLY TANK, WASTE COLLECTOR TANK, FOOT CONTROLLER, THREE ORAL EVACUATOR TIPS, ONE DRY CUSPIDOR, TWO COILED HANDPIECE HOSES,
III EXTERIOR CONTAINER WEIGHT: 72.00 POUNDS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: DENTAL OPERATING AND TREATMENT UNIT FIELD:
III UNIT OF ISSUE CUBE: 2.80 CUBIC FEET
SPECIAL FEATURES: (**) THIS ITEM IS PORTABLE UNTIL IT IS UNPACKED AND SET UP, THEN IT CAN BE EITHER STATIONARY OR MOBILE (FOUR BALL CASTERS ARE SUPPLY WITH THIS ITEM).
~1: ONE HIGH SPEED CONTRA-ANGLE HANDPIECE, 6520-01-386-8295, ONE LOW SPEED STRAIGHT HANDPIECE, 6520-00-138-2308, ONE ROTATING QUICK DISCONNECT NON-FIBEROPTIC HANDPIECE COUPLER, 6520-01-387-0030, A CABINET TOP CAPABLE OF NESTING A REMOVABLE TRAY,
~2: 6530-00-926-9170 OR 6530-00-794-0600, AND ONE ACCESSORY KIT. USED WITH COMPRESSOR-DEHYDRATOR 6520-00-129-1246 AND ULTRASONIC PROPHYLAXIS UNIT 6520-01-142-8228. FOR RESTORATIVE DENTISTRY IN THE FIELD. FOR SUCTION APPARATUS TIP ORDER: 6520-01-131-7922,
~3: 6520-01-131-7924, OR 6520-01-185-2532.
Related Searches:
FUS336
OPERATING AND TREAT
NSN, MFG P/N
6520013335961
NSN
6520-01-333-5961
MFG
FORT DEFIANCE INDUSTRIES INC.
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: PORTABLE (**), AIR OPERATED WITH CARRYING CASE. C/O: TRIPLEX SYRINGE, HIGH VELOCITY ORAL EVACUATOR SYSTEM, SALIVA EJECTOR, WATER SUPPLY TANK, WASTE COLLECTOR TANK, FOOT CONTROLLER, THREE ORAL EVACUATOR TIPS, ONE DRY CUSPIDOR, TWO COILED HANDPIECE HOSES,
III EXTERIOR CONTAINER WEIGHT: 72.00 POUNDS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: DENTAL OPERATING AND TREATMENT UNIT FIELD:
III UNIT OF ISSUE CUBE: 2.80 CUBIC FEET
SPECIAL FEATURES: (**) THIS ITEM IS PORTABLE UNTIL IT IS UNPACKED AND SET UP, THEN IT CAN BE EITHER STATIONARY OR MOBILE (FOUR BALL CASTERS ARE SUPPLY WITH THIS ITEM).
~1: ONE HIGH SPEED CONTRA-ANGLE HANDPIECE, 6520-01-386-8295, ONE LOW SPEED STRAIGHT HANDPIECE, 6520-00-138-2308, ONE ROTATING QUICK DISCONNECT NON-FIBEROPTIC HANDPIECE COUPLER, 6520-01-387-0030, A CABINET TOP CAPABLE OF NESTING A REMOVABLE TRAY,
~2: 6530-00-926-9170 OR 6530-00-794-0600, AND ONE ACCESSORY KIT. USED WITH COMPRESSOR-DEHYDRATOR 6520-00-129-1246 AND ULTRASONIC PROPHYLAXIS UNIT 6520-01-142-8228. FOR RESTORATIVE DENTISTRY IN THE FIELD. FOR SUCTION APPARATUS TIP ORDER: 6520-01-131-7922,
~3: 6520-01-131-7924, OR 6520-01-185-2532.
Related Searches:
M0-009
OPERATING AND TREAT
NSN, MFG P/N
6520013335961
NSN
6520-01-333-5961
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: PORTABLE (**), AIR OPERATED WITH CARRYING CASE. C/O: TRIPLEX SYRINGE, HIGH VELOCITY ORAL EVACUATOR SYSTEM, SALIVA EJECTOR, WATER SUPPLY TANK, WASTE COLLECTOR TANK, FOOT CONTROLLER, THREE ORAL EVACUATOR TIPS, ONE DRY CUSPIDOR, TWO COILED HANDPIECE HOSES,
III EXTERIOR CONTAINER WEIGHT: 72.00 POUNDS
III PART NAME ASSIGNED BY CONTROLLING AGENCY: DENTAL OPERATING AND TREATMENT UNIT FIELD:
III UNIT OF ISSUE CUBE: 2.80 CUBIC FEET
SPECIAL FEATURES: (**) THIS ITEM IS PORTABLE UNTIL IT IS UNPACKED AND SET UP, THEN IT CAN BE EITHER STATIONARY OR MOBILE (FOUR BALL CASTERS ARE SUPPLY WITH THIS ITEM).
~1: ONE HIGH SPEED CONTRA-ANGLE HANDPIECE, 6520-01-386-8295, ONE LOW SPEED STRAIGHT HANDPIECE, 6520-00-138-2308, ONE ROTATING QUICK DISCONNECT NON-FIBEROPTIC HANDPIECE COUPLER, 6520-01-387-0030, A CABINET TOP CAPABLE OF NESTING A REMOVABLE TRAY,
~2: 6530-00-926-9170 OR 6530-00-794-0600, AND ONE ACCESSORY KIT. USED WITH COMPRESSOR-DEHYDRATOR 6520-00-129-1246 AND ULTRASONIC PROPHYLAXIS UNIT 6520-01-142-8228. FOR RESTORATIVE DENTISTRY IN THE FIELD. FOR SUCTION APPARATUS TIP ORDER: 6520-01-131-7922,
~3: 6520-01-131-7924, OR 6520-01-185-2532.
Related Searches:
2004
REMOVER,GUTTA PERCH
NSN, MFG P/N
6520013336260
NSN
6520-01-333-6260
MFG
PETER BRASSELER HOLDINGS L.P. DBA BRASSELER USA DENTAL
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: LATCH TYPE;STERILE; SPIRALED VENT; CALIBRATED HIGH GRADE STAINLESS STEEL BLADES; ALUMINUM; BLACK ELECTROLYTE ISO COLOR CODED HANDLE; CALIBRATION DEPTH MARKINGS; 18,19,20 AND 21 MM; BLADE LENGTH 21 MM; BLADE DIA 0.40 MM,PORM 0.02 MM,PROGRESSING TO 0.72 MM
III PART NAME ASSIGNED BY CONTROLLING AGENCY: REMOVER GUTTA PERCHA LATCH TYPE STERILE F/ LOW SPEED HANDPIECE6S
~1: AT 16.0 MM FROM THE TIP; HANDLE LENGTH 12 MM; GUTTA PERCHA BECOMES PLASTICIZED BY FRICTIONAL HEAT IS EXTRUDED ONTO BLADE; FOR USE ON LOW SPEED HANDPIECE
Related Searches:
2702004
REMOVER,GUTTA PERCH
NSN, MFG P/N
6520013336260
NSN
6520-01-333-6260
MFG
PETER BRASSELER HOLDINGS L.P. DBA BRASSELER USA DENTAL
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: LATCH TYPE;STERILE; SPIRALED VENT; CALIBRATED HIGH GRADE STAINLESS STEEL BLADES; ALUMINUM; BLACK ELECTROLYTE ISO COLOR CODED HANDLE; CALIBRATION DEPTH MARKINGS; 18,19,20 AND 21 MM; BLADE LENGTH 21 MM; BLADE DIA 0.40 MM,PORM 0.02 MM,PROGRESSING TO 0.72 MM
III PART NAME ASSIGNED BY CONTROLLING AGENCY: REMOVER GUTTA PERCHA LATCH TYPE STERILE F/ LOW SPEED HANDPIECE6S
~1: AT 16.0 MM FROM THE TIP; HANDLE LENGTH 12 MM; GUTTA PERCHA BECOMES PLASTICIZED BY FRICTIONAL HEAT IS EXTRUDED ONTO BLADE; FOR USE ON LOW SPEED HANDPIECE
Related Searches:
98-2062
REMOVER,GUTTA PERCH
NSN, MFG P/N
6520013336260
NSN
6520-01-333-6260
MFG
DEFENSE LOGISTICS AGENCY DIRECTORATE OF MEDICAL MATERIEL DEFENSE SUPPLY CENTER PHILADELPHIA
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: LATCH TYPE;STERILE; SPIRALED VENT; CALIBRATED HIGH GRADE STAINLESS STEEL BLADES; ALUMINUM; BLACK ELECTROLYTE ISO COLOR CODED HANDLE; CALIBRATION DEPTH MARKINGS; 18,19,20 AND 21 MM; BLADE LENGTH 21 MM; BLADE DIA 0.40 MM,PORM 0.02 MM,PROGRESSING TO 0.72 MM
III PART NAME ASSIGNED BY CONTROLLING AGENCY: REMOVER GUTTA PERCHA LATCH TYPE STERILE F/ LOW SPEED HANDPIECE6S
~1: AT 16.0 MM FROM THE TIP; HANDLE LENGTH 12 MM; GUTTA PERCHA BECOMES PLASTICIZED BY FRICTIONAL HEAT IS EXTRUDED ONTO BLADE; FOR USE ON LOW SPEED HANDPIECE
Related Searches:
28-0503-01
LENS,LIGHT
NSN, MFG P/N
6520013337707
NSN
6520-01-333-7707
MFG
A-DEC INC.
Description
DESIGN CONTROL REFERENCE: 28-0503-01
END ITEM IDENTIFICATION: 6520-01-321-7750
MANUFACTURERS CODE: 51840
PART NAME ASSIGNED BY CONTROLLING AGENCY: LENS LIGHT W/DETENT PADS E.I. NSN 6520013217750 LIGHT SET DENTAL
PURCHASE DESCRIPTION IDENTIFICATION: 51840-28-0503-03
SPECIAL FEATURES: LENS W/DETENT PADS; FOR USE ON LIGHT SET,DENTAL; MODEL 6300
THE MANUFACTURERS DATA:
Related Searches:
28-0503-03
LENS,LIGHT
NSN, MFG P/N
6520013337707
NSN
6520-01-333-7707
MFG
A-DEC INC.
Description
DESIGN CONTROL REFERENCE: 28-0503-01
END ITEM IDENTIFICATION: 6520-01-321-7750
MANUFACTURERS CODE: 51840
PART NAME ASSIGNED BY CONTROLLING AGENCY: LENS LIGHT W/DETENT PADS E.I. NSN 6520013217750 LIGHT SET DENTAL
PURCHASE DESCRIPTION IDENTIFICATION: 51840-28-0503-03
SPECIAL FEATURES: LENS W/DETENT PADS; FOR USE ON LIGHT SET,DENTAL; MODEL 6300
THE MANUFACTURERS DATA:
Related Searches:
688305
RESIN,ACRYLIC,DENTAL
NSN, MFG P/N
6520013337750
NSN
6520-01-333-7750
MFG
DENTSPLY INTERNATIONAL INC. DBA TRUBYTE DIV DENTSPLY PROSTHETICS DIVISION AKA TRUBYTE
Description
COLOR: PINK, LIGHT RED
CURING PROCESS TYPE: HEAT
FURNISHED ITEMS AND QUANTITY: 630 GM POWDER, 4; 430 ML LIQUID, 3; HEAT SEAL BAG, 150
PHYSICAL FORM: LIQUID AND POWDER
SPECIAL FEATURES: LUCITONE 199 DENTURE BASE RESIN; ULTRA-HIGH IMPACT MATERIAL; PACKAGE CONTAINS SUFFICIENT MATERIAL TO MAKE APPROXIMATELY 120 DENTURE BASES
USAGE DESIGN: DENTURE RESTORATION
WEIGHT: 2520.0 GRAMS NOMINAL
Related Searches:
91-1-17-33 LAP
RESIN,ACRYLIC,DENTAL
NSN, MFG P/N
6520013337750
NSN
6520-01-333-7750
MFG
AIR FORCE MEDICAL LOGISTICS OFFICE
Description
COLOR: PINK, LIGHT RED
CURING PROCESS TYPE: HEAT
FURNISHED ITEMS AND QUANTITY: 630 GM POWDER, 4; 430 ML LIQUID, 3; HEAT SEAL BAG, 150
PHYSICAL FORM: LIQUID AND POWDER
SPECIAL FEATURES: LUCITONE 199 DENTURE BASE RESIN; ULTRA-HIGH IMPACT MATERIAL; PACKAGE CONTAINS SUFFICIENT MATERIAL TO MAKE APPROXIMATELY 120 DENTURE BASES
USAGE DESIGN: DENTURE RESTORATION
WEIGHT: 2520.0 GRAMS NOMINAL
Related Searches:
F91A025
RESIN,ACRYLIC,DENTAL
NSN, MFG P/N
6520013337750
NSN
6520-01-333-7750
MFG
AIR FORCE MEDICAL LOGISTICS OFFICE
Description
COLOR: PINK, LIGHT RED
CURING PROCESS TYPE: HEAT
FURNISHED ITEMS AND QUANTITY: 630 GM POWDER, 4; 430 ML LIQUID, 3; HEAT SEAL BAG, 150
PHYSICAL FORM: LIQUID AND POWDER
SPECIAL FEATURES: LUCITONE 199 DENTURE BASE RESIN; ULTRA-HIGH IMPACT MATERIAL; PACKAGE CONTAINS SUFFICIENT MATERIAL TO MAKE APPROXIMATELY 120 DENTURE BASES
USAGE DESIGN: DENTURE RESTORATION
WEIGHT: 2520.0 GRAMS NOMINAL
Related Searches:
LUCITONE 199
RESIN,ACRYLIC,DENTAL
NSN, MFG P/N
6520013337750
NSN
6520-01-333-7750
MFG
DENTSPLY INTERNATIONAL INC. DBA TRUBYTE DIV DENTSPLY PROSTHETICS DIVISION AKA TRUBYTE
Description
COLOR: PINK, LIGHT RED
CURING PROCESS TYPE: HEAT
FURNISHED ITEMS AND QUANTITY: 630 GM POWDER, 4; 430 ML LIQUID, 3; HEAT SEAL BAG, 150
PHYSICAL FORM: LIQUID AND POWDER
SPECIAL FEATURES: LUCITONE 199 DENTURE BASE RESIN; ULTRA-HIGH IMPACT MATERIAL; PACKAGE CONTAINS SUFFICIENT MATERIAL TO MAKE APPROXIMATELY 120 DENTURE BASES
USAGE DESIGN: DENTURE RESTORATION
WEIGHT: 2520.0 GRAMS NOMINAL
Related Searches:
18473
INVESTMENT,DENTAL
NSN, MFG P/N
6520013337751
NSN
6520-01-333-7751
MFG
WHIP-MIX CORPORATION
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INVESTMENT DEN RESTORATION 3MIN SETTING TIME 60GM/ENVELOPE 24S
SETTING TIME: 3 MINUTES NOMINAL
SPECIAL FEATURES: USED FOR DIRECT FIRING CERAMICS; PREWEIGHED ENVELOPES 60 GRAMS
USAGE DESIGN: DENTAL RESTORATION
Related Searches:
90-11-26-86
INVESTMENT,DENTAL
NSN, MFG P/N
6520013337751
NSN
6520-01-333-7751
MFG
AIR FORCE MEDICAL LOGISTICS OFFICE
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INVESTMENT DEN RESTORATION 3MIN SETTING TIME 60GM/ENVELOPE 24S
SETTING TIME: 3 MINUTES NOMINAL
SPECIAL FEATURES: USED FOR DIRECT FIRING CERAMICS; PREWEIGHED ENVELOPES 60 GRAMS
USAGE DESIGN: DENTAL RESTORATION
Related Searches:
F90K187
INVESTMENT,DENTAL
NSN, MFG P/N
6520013337751
NSN
6520-01-333-7751
MFG
AIR FORCE MEDICAL LOGISTICS OFFICE
Description
III PART NAME ASSIGNED BY CONTROLLING AGENCY: INVESTMENT DEN RESTORATION 3MIN SETTING TIME 60GM/ENVELOPE 24S
SETTING TIME: 3 MINUTES NOMINAL
SPECIAL FEATURES: USED FOR DIRECT FIRING CERAMICS; PREWEIGHED ENVELOPES 60 GRAMS
USAGE DESIGN: DENTAL RESTORATION
Related Searches:
T10.4C
CLEANER,ULTRASONIC
NSN, MFG P/N
6520013337755
NSN
6520-01-333-7755
MFG
OMEGA ELECTRONICS
Description
DEPARTURE FROM CITED DOCUMENT: REQUISITIONER SHOULD SPECIFY VOLTAGE AND FREQUENCY REQUIRED; 115 VAC 60 HZ; 115 VAC 50 HZ; 230 VAC 50 HZ; 230 VAC 60 HZ; CENTRAL PROCUREMENT OF MEDICAL EQUIPMENT "CENPROME" SERVICE CONTROLLED AND MANAGED ITEM; REQUISTION USING PUBLISHED CUSTOMER ORDER
III PART NAME ASSIGNED BY CONTROLLING AGENCY: CLEANER ULTRASONIC DEN 150/230V 50/60HZ AC BENCHTOP 2.7GAL CAP
SPECIAL FEATURES: 115/230 VOLT; 50/60 HZ,AC; BENCHTOP; 2.7 GALLON (10.2 LITER) CAPACITY TANK; CONSISTS OF A TANK LID COVER,TIMER,CASSETTE RACK,AND A THERMOSTATICALLY CONTROLLED HEATER AND DRAIN; FOR USE IN CLEANING DENTAL INSTRUMENTS
SPECIFICATION/STANDARD DATA: 7W657-DLA 120-91-D-8025 GOVERNMENT SPECIFICATION
~1: LIST (COL) ONLY IN ACCORDANCE W/SERVICE OR AGENCY INSTRUCTIONS; SERVICE POINTS OF CONTACT FOR INFORMATION AND REQUISITIONING INSTRUCTIONS ARE; U.S. ARMY MEDICAL MATERIAL AGENCY,USAMMA/SGMMA-OM,FT,DETRICK,MD 21702-5001,AV 343-7403 COMMERCIAL (301)
~2: 619-7403; AIR FORCE MEDICAL LOGISTICS OFFICE,AFMLO/FOM,FT,DETRICK MD 21702-5001,AV 343-7487 COMMERCIAL (301) 619-7487; NAVAL MEDICAL MATERIEL SUPPORT COMMAND,NAVMEDMATSUPPCOM,FT,DETRICK MD 21702-5001,AV 343-7117 COMMERCIAL (301) 619-7117
Related Searches:
12377
WHEEL,ABRASIVE
NSN, MFG P/N
6520013339691
NSN
6520-01-333-9691
MFG
PREMIER DENTAL PRODUCTS CO
Description
ABRASIVE MATERIAL: DIAMOND
BINDER MATERIAL: METAL
III PART NAME ASSIGNED BY CONTROLLING AGENCY: WHEEL ABRASIVE DIAMOND DENTAL STYLE 109 30000RPM FINE GRADE
MAXIMUM SPEED RATING IN RPM: 30000.0
OVERALL THICKNESS: 10.0 MILLIMETERS NOMINAL
SPECIAL FEATURES: FINE GRADE; TWO RED STRIPES ON SHANK; 1/16 IN. DIA OF SHANK; USED TO SMOOTH AND POLISH RESTORATION; BASE DIA 1.8 MM
USAGE DESIGN: DENTAL
WHEEL DIAMETER: 1.1 MILLIMETERS NOMINAL
WHEEL STYLE: 109 A2
Related Searches:
378-3203
WHEEL,ABRASIVE
NSN, MFG P/N
6520013339691
NSN
6520-01-333-9691
MFG
HENRY SCHEIN INC. DIV SPECIAL MARKETS / FEDERAL SALES
Description
ABRASIVE MATERIAL: DIAMOND
BINDER MATERIAL: METAL
III PART NAME ASSIGNED BY CONTROLLING AGENCY: WHEEL ABRASIVE DIAMOND DENTAL STYLE 109 30000RPM FINE GRADE
MAXIMUM SPEED RATING IN RPM: 30000.0
OVERALL THICKNESS: 10.0 MILLIMETERS NOMINAL
SPECIAL FEATURES: FINE GRADE; TWO RED STRIPES ON SHANK; 1/16 IN. DIA OF SHANK; USED TO SMOOTH AND POLISH RESTORATION; BASE DIA 1.8 MM
USAGE DESIGN: DENTAL
WHEEL DIAMETER: 1.1 MILLIMETERS NOMINAL
WHEEL STYLE: 109 A2
