My Quote Request
No products added yet
5306-01-532-2933
20 Products
73-0120
EYE BOLT,AIRCRAFT,M
NSN, MFG P/N
5306015322933
NSN
5306-01-532-2933
MFG
B E WALLACE PRODUCTS CORP.
Description
III END ITEM IDENTIFICATION: SUPPORT OF PRE-PROVISIONING ITEMS FOR WHICH NAVICP PHIL ACTS AS POE
Related Searches:
BACB30-9
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306015322555
NSN
5306-01-532-2555
MFG
NAVAL SEA SYSTEMS COMMAND
Description
FASTENER LENGTH: 0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
GRIP DIAMETER: 0.248 INCHES MINIMUM AND 0.249 INCHES MAXIMUM
GRIP LENGTH: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM
HEAD DIAMETER: 0.511 INCHES NOMINAL
HEAD HEIGHT: 0.111 INCHES NOMINAL
HEAD STYLE: C39 ROUND WEDGE
III END ITEM IDENTIFICATION: C-135 AIRCRAFT
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,100DEG CSK HEAD (SHORT THREAD) CLOSE TOLERANCE, 160,000 PSI.
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: NAS498 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPECIAL FEATURES: UNPLATED WITHOUT COTTER PIN HOLE.
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.375 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
Related Searches:
901-020-576-117
BOLT,SHEAR
NSN, MFG P/N
5306015322785
NSN
5306-01-532-2785
MFG
THE BOEING COMPANY DBA BOEING
Description
CRITICALITY CODE JUSTIFICATION: FEAT
III END ITEM IDENTIFICATION: V-22 LRIP 1 E-NSN ISIL
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,AIRCRAFT,MATER
SPECIAL FEATURES: ESSENTIAL TO WEAPON SYSTEM PERFORMANCE OR OPERATION, OR THE PRESERVATION OF LIFE OR SAFETY OF OPERATING PERSONNEL
Related Searches:
51-0440
HEX BOLT,AIRCRAFT,M
NSN, MFG P/N
5306015322910
NSN
5306-01-532-2910
MFG
B E WALLACE PRODUCTS CORP.
Description
HEX BOLT,AIRCRAFT,M
Related Searches:
110385-25
BOLT,SHEAR
NSN, MFG P/N
5306015322911
NSN
5306-01-532-2911
MFG
BAE SYSTEMS AEROSPACE & DEFENSE GROUP INC.
Description
CRITICALITY CODE JUSTIFICATION: FEAT
III END ITEM IDENTIFICATION: V-22 LRIP 1 E-NSN ISIL
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,SHEAR,AIRCRAFT
SPECIAL FEATURES: ESSENTIAL TO WEAPON SYSTEM PERFORMANCE OR OPERATION, OR THE PRESERVATION OF LIFE OR SAFETY OF OPERATING PERSONNEL
Related Searches:
HH9091284V
SOCKET BOLT,AIRCRAF
NSN, MFG P/N
5306015322972
NSN
5306-01-532-2972
MFG
B E WALLACE PRODUCTS CORP.
Description
III END ITEM IDENTIFICATION: SUPPORT OF PRE-PROVISIONING ITEMS FOR WHICH NAVICP PHIL ACTS AS POE
Related Searches:
HH9091282V
SOCKET BOLT,AIRCRAF
NSN, MFG P/N
5306015322976
NSN
5306-01-532-2976
MFG
B E WALLACE PRODUCTS CORP.
Description
III END ITEM IDENTIFICATION: SUPPORT OF PRE-PROVISIONING ITEMS FOR WHICH NAVICP PHIL ACTS AS POE
Related Searches:
HH9091292V
SOCKET BOLT,AIRCRAF
NSN, MFG P/N
5306015322976
NSN
5306-01-532-2976
MFG
B E WALLACE PRODUCTS CORP.
Description
III END ITEM IDENTIFICATION: SUPPORT OF PRE-PROVISIONING ITEMS FOR WHICH NAVICP PHIL ACTS AS POE
Related Searches:
HHCF181010V
BOLT,SOCKET,AIRCRAF
NSN, MFG P/N
5306015323013
NSN
5306-01-532-3013
MFG
B E WALLACE PRODUCTS CORP.
Description
III END ITEM IDENTIFICATION: SUPPORT OF PRE-PROVISIONING ITEMS FOR WHICH NAVICP PHIL ACTS AS POE
Related Searches:
NAS6805A33
BOLT,SHEAR
NSN, MFG P/N
5306015323046
NSN
5306-01-532-3046
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
III END ITEM IDENTIFICATION: V-22 LRIP 1 E-NSN ISIL
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT,SHEAR,AIRCRAFT
SPECIAL FEATURES: 015427541 MECHANISM ASSY,LATC. 015427546 MECHANISM ASSY,LATC. MODEL CODE FOR THE V-22 AIRCRAFT.
Related Searches:
NAS6806A31
BOLT,SHEAR,AIRCRAFT
NSN, MFG P/N
5306015323048
NSN
5306-01-532-3048
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
III END ITEM IDENTIFICATION: MV-22 AIRCRAFT
Related Searches:
901-210-027-155
BOLT,AIRCRAFT,MATER
NSN, MFG P/N
5306015323129
NSN
5306-01-532-3129
MFG
BELL HELICOPTER TEXTRON INC.
Description
III END ITEM IDENTIFICATION: MV-22 AIRCRAFT
Related Searches:
NAS6707D20
BOLT,SHEAR
NSN, MFG P/N
5306015323831
NSN
5306-01-532-3831
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.893 INCHES MINIMUM AND 2.243 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.929 INCHES MINIMUM AND 1.959 INCHES MAXIMUM
GRIP DIAMETER: 0.4360 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM
GRIP LENGTH: 1.365 INCHES MINIMUM AND 1.385 INCHES MAXIMUM
HEAD HEIGHT: 0.219 INCHES MINIMUM AND 0.234 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BOLT, HEX HEAD
MATERIAL: IRON ALLOY 660 OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.438 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.111 INCHES NOMINAL FIRST HOLE
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT: CADMIUM OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.669 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.678 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
Related Searches:
NAS6404-12D
BOLT,SHEAR
NSN, MFG P/N
5306015323834
NSN
5306-01-532-3834
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.300 INCHES MINIMUM AND 0.350 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.105 INCHES MINIMUM AND 1.135 INCHES MAXIMUM
GRIP DIAMETER: 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD HEIGHT: 0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
III END ITEM IDENTIFICATION: B757 AIRCRAFT
MATERIAL: TITANIUM ALLOY UNS R56400 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA: 80205-NAS6404 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.370 INCHES NOMINAL
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
Related Searches:
51-0460
BOLT,MACHINE
NSN, MFG P/N
5306015323945
NSN
5306-01-532-3945
MFG
B E WALLACE PRODUCTS CORP.
Description
III END ITEM IDENTIFICATION: SUPPORT FOR PREPROVISIONING ITEMS WHERE NAVICP/KE IS POE
III PART NAME ASSIGNED BY CONTROLLING AGENCY: HEX HEAD BOLT, 1/2-13N
Related Searches:
B18234B05012N
BOLT,MACHINE
NSN, MFG P/N
5306015324030
NSN
5306-01-532-4030
MFG
AMERICAN NATIONAL STANDARDS INSTITUTE DBA A N S I
Description
EXTERNAL THREAD TOLERANCE CLASS: 6G
FASTENER LENGTH: 12.0 MILLIMETERS NOMINAL
HEAD STYLE: C7 HEXAGON EXTENDED WASHER
III END ITEM IDENTIFICATION: STRYKER FOV
MATERIAL: STEEL PROPERTY CLASS 10.9 OVERALL
THREAD DIRECTION: RIGHT-HAND
THREAD PITCH IN MILLIMETERS: 1.0
THREAD SERIES DESIGNATOR: M
Related Searches:
MS212196H06027
BOLT,SHEAR
NSN, MFG P/N
5306015324203
NSN
5306-01-532-4203
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
EXTENDED WASHER DIAMETER: 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
FASTENER LENGTH: 2.407 INCHES MINIMUM AND 2.437 INCHES MAXIMUM
GRIP DIAMETER: 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
GRIP LENGTH: 1.688 INCHES NOMINAL
HEAD HEIGHT: 0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.422 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.005 INCHES NOMINAL
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIFICATION/STANDARD DATA: 80205-NASM21296 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-8837, TY II, CL2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.734 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MS21296H06027
BOLT,SHEAR
NSN, MFG P/N
5306015324203
NSN
5306-01-532-4203
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
EXTENDED WASHER DIAMETER: 0.691 INCHES MINIMUM AND 0.701 INCHES MAXIMUM
EXTENDED WASHER THICKNESS: 0.044 INCHES MINIMUM AND 0.064 INCHES MAXIMUM
FASTENER LENGTH: 2.407 INCHES MINIMUM AND 2.437 INCHES MAXIMUM
GRIP DIAMETER: 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM
GRIP LENGTH: 1.688 INCHES NOMINAL
HEAD HEIGHT: 0.327 INCHES MINIMUM AND 0.347 INCHES MAXIMUM
HEAD MINOR DIAMETER: 0.422 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
HEAD STYLE: C11 SPLINE EXTENDED WASHER
HOLE CONFIGURATION STYLE: E9 ROUND
HOLE DIAMETER: 0.005 INCHES NOMINAL
HOLE QUANTITY: 4
HOLE TYPE: DRILLED
MATERIAL: STEEL COMP H11 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIFICATION/STANDARD DATA: 80205-NASM21296 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-8837, TY II, CL2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.734 INCHES NOMINAL
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1306-68
BOLT,SHEAR
NSN, MFG P/N
5306015324259
NSN
5306-01-532-4259
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 4.813 INCHES MINIMUM AND 4.843 INCHES MAXIMUM
GRIP DIAMETER: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 4.115 INCHES MINIMUM AND 4.135 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
HEAD STYLE: C3 DISHED HEXAGON
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1306 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2, CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
Related Searches:
MS9209-30
BOLT,MACHINE
NSN, MFG P/N
5306015324268
NSN
5306-01-532-4268
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS9209-30
EXTENDED WASHER DIAMETER: 0.438 INCHES NOMINAL
EXTENDED WASHER THICKNESS: 0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
FASTENER LENGTH: 2.250 INCHES NOMINAL
GRIP DIAMETER: 0.222 INCHES MINIMUM AND 0.232 INCHES MAXIMUM
HEAD HEIGHT: 0.330 INCHES NOMINAL
HEAD STYLE: C10 DOUBLE HEXAGON W/HOLE
III END ITEM IDENTIFICATION: AIRBORNE RADAR ASTOR
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
