My Quote Request
No products added yet
5305-00-006-6574
20 Products
FF-S-85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305000066574
NSN
5305-00-006-6574
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEPARTURE FROM CITED DESIGNATOR: MATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
FASTENER LENGTH: 0.969 INCHES MINIMUM AND 1.000 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 85000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
SPEC/STD CONTROLLING DATA:
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
SURFACE FINISH: 63.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.000 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM
Related Searches:
MS21318-29
SCREW,DRIVE
NSN, MFG P/N
5305000064743
NSN
5305-00-006-4743
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEPARTURE FROM CITED DESIGNATOR: MATERIAL MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
FASTENER LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
FEATURES PROVIDED: CASEHARDENED
HEAD DIAMETER: 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM
HEAD STYLE: C37 ROUND
MANUFACTURERS CODE: 81348
MANUFACTURERS CODE: 96906
MATERIAL: STEEL OVERALL
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FFS107
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS21318-29
NONDEFINITIVE SPEC/STD DATA: U TYPE
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES
NONMACHINE THREAD STYLE: A16 DRIVE SCREW (TYPE U)
PILOT DIAMETER: 0.112 INCHES MINIMUM AND 0.116 INCHES MAXIMUM
PILOT LENGTH: 0.062 INCHES NOMINAL
SPEC/STD CONTROLLING DATA:
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL
TEST DATA DOCUMENT: 81349-MIL-P-23199 SPECIFICATION
Related Searches:
69300-4-8
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000064766
NSN
5305-00-006-4766
MFG
HAMILTON SUNDSTRAND CORPORATION
Description
DESIGN CONTROL REFERENCE: 69300-4-8
FASTENER LENGTH: 0.984 INCHES MINIMUM AND 1.016 INCHES MAXIMUM
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E12 ROUND LONGITUDINAL HOLE
HOLE DIAMETER: 0.047 INCHES NOMINAL
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 73030
MATERIAL: STEEL COMP 304 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP 32.0 MICROINCHES THREADS
SURFACE TREATMENT: PASSIVATE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.734 INCHES MINIMUM AND 0.826 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
WIDTH ACROSS FLATS: 0.188 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
473605-5
SCREW,MACHINE
NSN, MFG P/N
5305000064836
NSN
5305-00-006-4836
MFG
HONEYWELL INTERNATIONAL INC DBA HONEYWELL DIV AEROSPACE-MINNEAPOLIS
Description
FASTENER LENGTH: 0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HEAD DIAMETER: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
HEAD HEIGHT: 0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER: 0.190 INCHES
SCREW MATERIAL: STEEL COMP 430
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.407 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
Related Searches:
NAS1742-04R5
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000064862
NSN
5305-00-006-4862
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1742 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.246 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
NAS1742-04R5
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000064862
NSN
5305-00-006-4862
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
HARDNESS RATING: 34.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: C32 PAN
INTERNAL DRIVE STYLE: D1 CROSS RECESS TYPE 1
LOCKING FEATURE: PATCH THREADS
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1742 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES THREADS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE2,CLASS3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.246 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNJC
Related Searches:
10288962
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000064867
NSN
5305-00-006-4867
MFG
U S ARMY AVIATION AND MISSILE COMMAND
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.380 INCHES MINIMUM AND 1.447 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.046 INCHES MINIMUM AND 0.050 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.413 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
2616-77099
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000064867
NSN
5305-00-006-4867
MFG
BRISTOL BABCOCK INC INSTRUMENTS-SYSTEMS DIV SUB OF BABCOCK INTL INC
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.380 INCHES MINIMUM AND 1.447 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.046 INCHES MINIMUM AND 0.050 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.413 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
53050064867
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000064867
NSN
5305-00-006-4867
MFG
E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.380 INCHES MINIMUM AND 1.447 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.046 INCHES MINIMUM AND 0.050 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.413 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
AIC996-26
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305000064867
NSN
5305-00-006-4867
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 1.380 INCHES MINIMUM AND 1.447 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH: 1.484 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
HARDNESS RATING: 80.0 ROCKWELL B MINIMUM OVERALL
HEAD DIAMETER: 0.365 INCHES MINIMUM AND 0.375 INCHES MAXIMUM
HEAD HEIGHT: 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.046 INCHES MINIMUM AND 0.050 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.413 INCHES MINIMUM AND 1.531 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNF
WIDTH ACROSS FLATS: 0.187 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
Related Searches:
1076-717
SETSCREW
NSN, MFG P/N
5305000065812
NSN
5305-00-006-5812
MFG
BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION I
Description
DESIGN CONTROL REFERENCE: 1076-717
FASTENER LENGTH: 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE: C101 HEADLESS (SETSCREW)
INTERNAL DRIVE STYLE: D14 SLOT
MANUFACTURERS CODE: 72314
MATERIAL: COPPER ALLOY 360 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-626,COMP 22 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.086 INCHES
POINT STYLE: F18 OVAL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 56
THREAD SERIES DESIGNATOR: UNC
Related Searches:
AN565E4L2
SETSCREW
NSN, MFG P/N
5305000065827
NSN
5305-00-006-5827
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN565E4L2
HEAD STYLE: C101 HEADLESS (SETSCREW)
MANUFACTURERS CODE: 88044
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4137 OR STEEL COMP 4140 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER: 0.112 INCHES
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
3150-1120-003
SCREW,MACHINE
NSN, MFG P/N
5305000066503
NSN
5305-00-006-6503
MFG
BAE SYSTEMS OPERATIONS LTD
Description
DESIGN CONTROL REFERENCE: 3150-1120-003
FASTENER LENGTH: 0.170 INCHES NOMINAL
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: K0656
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.110 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
3150-1120-003
SCREW,MACHINE
NSN, MFG P/N
5305000066503
NSN
5305-00-006-6503
MFG
BAE SYSTEMS INTEGRATED DEFENSE SOLUTIONS INC.
Description
DESIGN CONTROL REFERENCE: 3150-1120-003
FASTENER LENGTH: 0.170 INCHES NOMINAL
HEAD DIAMETER: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM
HEAD HEIGHT: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HEAD STYLE: A33 FILLISTER
INTERNAL DRIVE STYLE: B1 CROSS RECESS TYPE 1
MANUFACTURERS CODE: K0656
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.112 INCHES
SCREW MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 316
SCREW SURFACE TREATMENT: PASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.110 INCHES NOMINAL
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
Related Searches:
A51M20568-11
SCREW,ADJUSTING
NSN, MFG P/N
5305000066507
NSN
5305-00-006-6507
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL,3.125 IN. LG,SMALL END 0.187 IN. DIA W/0,190-32 UNJF-3A THD,MAJOR DIA 0.312-24 UNJF-3A THD,HEAD 0.187 IN. DIA AND 1.250 IN. LG
Related Searches:
A51M20568-11
SCREW,ADJUSTING
NSN, MFG P/N
5305000066507
NSN
5305-00-006-6507
MFG
ABELCONN LLC
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL,3.125 IN. LG,SMALL END 0.187 IN. DIA W/0,190-32 UNJF-3A THD,MAJOR DIA 0.312-24 UNJF-3A THD,HEAD 0.187 IN. DIA AND 1.250 IN. LG
Related Searches:
A51M20568-11
SCREW,ADJUSTING
NSN, MFG P/N
5305000066507
NSN
5305-00-006-6507
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL,3.125 IN. LG,SMALL END 0.187 IN. DIA W/0,190-32 UNJF-3A THD,MAJOR DIA 0.312-24 UNJF-3A THD,HEAD 0.187 IN. DIA AND 1.250 IN. LG
Related Searches:
A51M20568-11
SCREW,ADJUSTING
NSN, MFG P/N
5305000066507
NSN
5305-00-006-6507
MFG
ABELCONN LLC
Description
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL,3.125 IN. LG,SMALL END 0.187 IN. DIA W/0,190-32 UNJF-3A THD,MAJOR DIA 0.312-24 UNJF-3A THD,HEAD 0.187 IN. DIA AND 1.250 IN. LG
Related Searches:
A51M20568-13
SCREW,ADJUSTING
NSN, MFG P/N
5305000066508
NSN
5305-00-006-6508
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
DESIGN CONTROL REFERENCE: A51M20568-13
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL,CADMIUM PLATE+ 4.937 IN. LG O/A+ 0.185 IN. MIN 0.190 IN. MAX DIA RIGHT END WITH 0.045 IN. MIN O.050 IN. MAX DIA HOLE CENTERED O.150 IN. FROM END+ 10-32 UNJF-3A THD 0.390 IN. LG LEFT END+ 0.309 IN. MIN 0.312 IN. MAX BODY DIA
MANUFACTURERS CODE: 61174
THE MANUFACTURERS DATA:
Related Searches:
A51M20568-13
SCREW,ADJUSTING
NSN, MFG P/N
5305000066508
NSN
5305-00-006-6508
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
DESIGN CONTROL REFERENCE: A51M20568-13
GENERAL CHARACTERISTICS ITEM DESCRIPTION: STEEL,CADMIUM PLATE+ 4.937 IN. LG O/A+ 0.185 IN. MIN 0.190 IN. MAX DIA RIGHT END WITH 0.045 IN. MIN O.050 IN. MAX DIA HOLE CENTERED O.150 IN. FROM END+ 10-32 UNJF-3A THD 0.390 IN. LG LEFT END+ 0.309 IN. MIN 0.312 IN. MAX BODY DIA
MANUFACTURERS CODE: 61174
THE MANUFACTURERS DATA:
