My Quote Request
No products added yet
5305-01-308-8203
20 Products
124894-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088203
NSN
5305-01-308-8203
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
MS24671-90
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013088195
NSN
5305-01-308-8195
MFG
BOSCH REXROTH GMBH LOHMANN STOLTER OHT
Description
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 84.0 DEGREES MAXIMUM
FASTENER LENGTH: 2.670 INCHES MINIMUM AND 2.750 INCHES MAXIMUM
HEAD DIAMETER: 0.112 INCHES MINIMUM AND 0.118 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OR STEEL COMP 384 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 80000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.625 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-86
NONDEFINITIVE SPEC/STD DATA: 4 TYPE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.750 INCHES NOMINAL
THREAD QUANTITY PER INCH: 11
THREAD SERIES DESIGNATOR: UNC
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL
Related Searches:
NAS1352N3H24
SCREW,CAP,SOCKET HEAD
NSN, MFG P/N
5305013088196
NSN
5305-01-308-8196
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
FASTENER LENGTH: 1.460 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 33.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.302 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
HEAD STYLE: C49 FLAT CHAMFER
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.044 INCHES MINIMUM AND 0.050 INCHES MAXIMUM
HOLE QUANTITY: 6
HOLE TYPE: DRILLED
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: IRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SPECIFICATION/STANDARD DATA: 80205-NAS1352 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.875 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNRC
WIDTH ACROSS FLATS: 0.1562 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM
Related Searches:
FF-S-85
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013088197
NSN
5305-01-308-8197
MFG
FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC
Description
DEPARTURE FROM CITED DOCUMENT: AS DIFFERENTIATED BY SURFACE TREATMENT
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.750 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND PHOSPHATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.282 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
Related Searches:
MS90726-185
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013088197
NSN
5305-01-308-8197
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
DEPARTURE FROM CITED DOCUMENT: AS DIFFERENTIATED BY SURFACE TREATMENT
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.750 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND PHOSPHATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.282 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
Related Searches:
MS90726-185
SCREW,CAP,HEXAGON HEAD
NSN, MFG P/N
5305013088197
NSN
5305-01-308-8197
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEPARTURE FROM CITED DOCUMENT: AS DIFFERENTIATED BY SURFACE TREATMENT
FASTENER LENGTH: 1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
HARDNESS RATING: 25.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
MANUFACTURERS CODE: 81348
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 120000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.750 INCHES
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: FF-S-85
NONDEFINITIVE SPEC/STD DATA: 2 TYPE AND 10P STYLE AND 5 GRADE
SPEC/STD CONTROLLING DATA:
SURFACE TREATMENT: CADMIUM AND PHOSPHATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 1.282 INCHES MINIMUM AND 1.500 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 16
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM
Related Searches:
128WM10146-5
SCREW,SHOULDER
NSN, MFG P/N
5305013088198
NSN
5305-01-308-8198
MFG
NORTHROP GRUMMAN SYSTEMS CORPORATION DIV NORTHROP GRUMMAN AEROSPACE SYSTEMS
Description
COUNTERSINK ANGLE: 90.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.760 INCHES NOMINAL
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D5 HEXAGON
MATERIAL: STEEL OVERALL
NOMINAL THREAD DIAMETER: 0.438 INCHES
SHOULDER SHAPE: ROUND ALL SHOULDERS
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNJF
WIDTH ACROSS FLATS: 0.190 INCHES MINIMUM AND 0.193 INCHES MAXIMUM
Related Searches:
NAS1606-6
SCREW,SHOULDER
NSN, MFG P/N
5305013088199
NSN
5305-01-308-8199
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.001 INCHES MINIMUM AND 1.031 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.717 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D9 HIGH-TORQUE
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 FED SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SHOULDER DIAMETER: 0.4047 INCHES MINIMUM AND 0.4057 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.228 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SPECIFICATION/STANDARD DATA: 80205-NAS1606 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.616 INCHES MINIMUM AND 0.666 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
NAS1580A4T16Y
SCREW,SHOULDER
NSN, MFG P/N
5305013088200
NSN
5305-01-308-8200
MFG
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 1.388 INCHES MINIMUM AND 1.418 INCHES MAXIMUM
HARDNESS RATING: 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER: 0.464 INCHES MINIMUM AND 0.506 INCHES MAXIMUM
HEAD STYLE: C50 FLAT COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHOULDER DIAMETER: 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.378 INCHES MINIMUM AND 0.428 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 28
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
124894-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088202
NSN
5305-01-308-8202
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M939-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088202
NSN
5305-01-308-8202
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AIC939-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088202
NSN
5305-01-308-8202
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HR248-3-2PX
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088202
NSN
5305-01-308-8202
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
SC1823-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088202
NSN
5305-01-308-8202
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
VT1731-3-2
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088202
NSN
5305-01-308-8202
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.516 INCHES MINIMUM AND 0.546 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
124894-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088203
NSN
5305-01-308-8203
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
3M939-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088203
NSN
5305-01-308-8203
MFG
BOEING COMPANY THE DBA BOEING
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
AIC939-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088203
NSN
5305-01-308-8203
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
HR248-3-3PX
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088203
NSN
5305-01-308-8203
MFG
HI-SHEAR CORPORATION
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
Related Searches:
PY12455-3-3
SCREW,CLOSE TOLERANCE
NSN, MFG P/N
5305013088203
NSN
5305-01-308-8203
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
COUNTERSINK ANGLE: 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
FASTENER LENGTH: 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM
GRIP DIAMETER: 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH: 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
HEAD DIAMETER: 0.2996 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM
HEAD HEIGHT: 0.013 INCHES MAXIMUM
HEAD STYLE: C46 FILLISTER COUNTERSUNK
INTERNAL DRIVE STYLE: D8 OFF-SET CRUCIFORM (TORQUE SET)
MATERIAL: NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SURFACE TREATMENT: PASSIVATE OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNJF
