My Quote Request
No products added yet
5935-01-571-9315
20 Products
0042651-001
DUMMY CONNECTOR,PLUG
NSN, MFG P/N
5935015719315
NSN
5935-01-571-9315
MFG
HARRIS CORPORATION DBA GOVERNMENT AEROSPACE SYSTEMS DIVISION DIV GOVERNMENT AEROSPACE SYSTEMS DIVISION
Description
III END ITEM IDENTIFICATION: NEXT HIGHER ASSEMBLY PART NO. 0042903 USED ON PAR TNO. 0042869
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SP1 SHORTING PLUG ASSEMBLY
Related Searches:
DPX2MA67S67S33B0012
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935015719433
NSN
5935-01-571-9433
DPX2MA67S67S33B0012
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935015719433
NSN
5935-01-571-9433
MFG
ITT CORPORATION DBA I T T CANNON
Description
BODY STYLE: 18G STRAIGHT SHAPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT: 2.778 INCHES MINIMUM AND 2.788 INCHES MAXIMUM
CONNECTOR LOCKING METHOD: FRICTION
CONTACT MATERIAL: COPPER ALLOY ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT POSITION ARRANGEMENT STYLE: CWAA 67 ALL MATING ENDS
CONTACT REMOVABILITY: REMOVABLE ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT: GOLD ALL MATING ENDS ALL CONTACT GROUPINGS
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS ALL CONTACT GROUPINGS
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH: 1.432 INCHES MINIMUM AND 1.442 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.766 INCHES NOMINAL
ENVIRONMENTAL PROTECTION: HUMIDITY RESISTANT AND SALT WATER RESISTANT AND SHOCK
Related Searches:
206138-8
CLAMP,CABLE,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935015719436
NSN
5935-01-571-9436
206138-8
CLAMP,CABLE,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935015719436
NSN
5935-01-571-9436
MFG
HYDRAULICS INTERNATIONAL INC.
Description
III END ITEM IDENTIFICATION: WIRE INSTALL DWG- COMMON GSE: PURIFIER HYDRAULIC FLUID, PCCN: P4J4F0 FACILITY TYPE EQUIPMENT FMFG3 HAMS HELICOPTER I LEVEL MAINT ONLY G0CMS COMMON SUPPORT EQUIPMENT
III PART NAME ASSIGNED BY CONTROLLING AGENCY: (INAVY) CABLE CLAMP
Related Searches:
1461228
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719518
NSN
5935-01-571-9518
MFG
LIDAN MARINE AB
Description
CONNECTOR LOCKING METHOD: SCREW
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 24.0 SINGLE MATING END SINGLE CONTACT GROUPING
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SOCKET, ELECTRICAL
INCLUDED CONTACT QUANTITY: 2 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
SHELL MATERIAL: PLASTIC
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
Related Searches:
193687
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719518
NSN
5935-01-571-9518
MFG
FESTO CORPORATION
Description
CONNECTOR LOCKING METHOD: SCREW
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS: 24.0 SINGLE MATING END SINGLE CONTACT GROUPING
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SOCKET, ELECTRICAL
INCLUDED CONTACT QUANTITY: 2 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
SHELL MATERIAL: PLASTIC
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
Related Searches:
PL455ACFLP-201
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719540
NSN
5935-01-571-9540
PL455ACFLP-201
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719540
NSN
5935-01-571-9540
MFG
TROMPETER ELECTRONICS INC .
Description
BODY STYLE: 9D STRAIGHT SHAPE
III END ITEM IDENTIFICATION: A-10
MATING END QUANTITY: 1
Related Searches:
PL455CFLP-201
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719540
NSN
5935-01-571-9540
PL455CFLP-201
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719540
NSN
5935-01-571-9540
MFG
UFC AEROSPACE CORP.
Description
BODY STYLE: 9D STRAIGHT SHAPE
III END ITEM IDENTIFICATION: A-10
MATING END QUANTITY: 1
Related Searches:
1461204
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719575
NSN
5935-01-571-9575
MFG
LIDAN MARINE AB
Description
BODY ANGLE IN DEG: 90.0
BODY STYLE: 15A ANGLE SHAPE W/CABLE CLAMP
DISTANCE FROM CENTERLINE TO CABLE END: 31.5 MILLIMETERS NOMINAL
III OPERATING TEMP RATING: -40.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SOCKET, ELECTRICAL
INCLUDED CONTACT QUANTITY: 8 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
OVERALL DIAMETER: 24.0 MILLIMETERS NOMINAL
SPECIAL FEATURES: HAS A KNURLED, COUPLING RING.
Related Searches:
161839
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719575
NSN
5935-01-571-9575
MFG
FESTO CORPORATION
Description
BODY ANGLE IN DEG: 90.0
BODY STYLE: 15A ANGLE SHAPE W/CABLE CLAMP
DISTANCE FROM CENTERLINE TO CABLE END: 31.5 MILLIMETERS NOMINAL
III OPERATING TEMP RATING: -40.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SOCKET, ELECTRICAL
INCLUDED CONTACT QUANTITY: 8 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
OVERALL DIAMETER: 24.0 MILLIMETERS NOMINAL
SPECIAL FEATURES: HAS A KNURLED, COUPLING RING.
Related Searches:
0L-SP-764343
BRACKET,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935015719591
NSN
5935-01-571-9591
0L-SP-764343
BRACKET,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935015719591
NSN
5935-01-571-9591
MFG
SPECTREX INC
Description
III END ITEM IDENTIFICATION: MRAP - UNIQUE NSN - MRAP NO PERMANENT WSDC IDENTIFIED
III PART NAME ASSIGNED BY CONTROLLING AGENCY: BASE FOR CONNECTOR
MOUNTING FACILITY TYPE AND QUANTITY: 3 UNTHREADED HOLE AND 4 THREADED HOLE
NOMINAL THREAD SIZE: 0.112 INCHES
SPECIAL FEATURES: 30MM L X 28MM H X 26MM W
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD QUANTITY PER INCH: 40
THREAD SERIES DESIGNATOR: UNC
UNTHREADED MOUNTING HOLE DIAMETER: 3.2 MILLIMETERS NOMINAL
Related Searches:
0212403 REV B FIND 5
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719634
NSN
5935-01-571-9634
0212403 REV B FIND 5
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719634
NSN
5935-01-571-9634
MFG
NAVY UNITED STATES DEPARTMENT OF THE DBA SPAWARSYSCEN DIV SPACE AND NAVAL WARFARE SYSTEMS CENTER - PACIFIC
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.106 INCHES NOMINAL
CONNECTOR CABLE STRAIN RELIEF METHOD: CRIMP TYPE
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT PLATING GOLD
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
OVERALL DIAMETER: 0.571 INCHES NOMINAL
OVERALL LENGTH: 1.190 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL SURFACE TREATMENT: NICKEL
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
Related Searches:
31-242-RFX
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719634
NSN
5935-01-571-9634
MFG
AMPHENOL CORPORATION DBA AMPHENOL AEROSPACE INDUSTRIAL
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.106 INCHES NOMINAL
CONNECTOR CABLE STRAIN RELIEF METHOD: CRIMP TYPE
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT PLATING GOLD
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
OVERALL DIAMETER: 0.571 INCHES NOMINAL
OVERALL LENGTH: 1.190 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL SURFACE TREATMENT: NICKEL
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
Related Searches:
93F1414
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719634
NSN
5935-01-571-9634
MFG
NEWARK ELECTRONICS CORPORATION DBA NEWARK DIV NEWARK
Description
BODY STYLE: 5D STRAIGHT SHAPE, INTERNAL COUPLING
CABLE ENTRANCE DIAMETER: 0.106 INCHES NOMINAL
CONNECTOR CABLE STRAIN RELIEF METHOD: CRIMP TYPE
CONNECTOR LOCKING METHOD: BAYONET LATCH
CONTACT POSITION ARRANGEMENT STYLE: ABBJ BNC SINGLE MATING END
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT PLATING GOLD
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: COAXIAL PIN SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
OVERALL DIAMETER: 0.571 INCHES NOMINAL
OVERALL LENGTH: 1.190 INCHES NOMINAL
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS: 50.0 SINGLE MATING END SINGLE CONTACT GROUPING
SHELL SURFACE TREATMENT: NICKEL
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
Related Searches:
290-010H2210-4
COVER,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935015719671
NSN
5935-01-571-9671
290-010H2210-4
COVER,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935015719671
NSN
5935-01-571-9671
MFG
GLENAIR INC.
Description
ATTACHMENT FEATURE LENGTH: 4.000 INCHES NOMINAL
BODY HEIGHT: 0.550 INCHES MAXIMUM
III PART NAME ASSIGNED BY CONTROLLING AGENCY: RECEPTACLE COVER
MOUNTING FACILITY TYPE AND QUANTITY: 1 THREADED COUPLING
OVERALL DIAMETER: 1.775 INCHES MAXIMUM
SPECIAL FEATURES: HYDROSTATIC SEALING CAPABILITY UP TO 5000 PSI WHEN MATED AND TIGHTENED TO RECOMMENDED TORQUE VALUES
STYLE DESIGNATOR: 11A INTERNAL BAYONET W/CHAIN OR ROPE
Related Searches:
M9001
ADAPTER,CONNECTOR
NSN, MFG P/N
5935015719773
NSN
5935-01-571-9773
MFG
INNOVATIVE ELECTRONICS & COMPUTING CORPORATION DBA I E C
Description
III END ITEM IDENTIFICATION: INSTALLATION KIT ELECTRONIC EQUIPMENT MK-2963
III PART NAME ASSIGNED BY CONTROLLING AGENCY: ADAPTER CONNECTOR
SPECIAL FEATURES: DB9 MALE TO FEMALE THIN PORT SAVER
Related Searches:
MS3406
CONNECTOR,PLUG,ELECTRICAL
NSN, MFG P/N
5935015719882
NSN
5935-01-571-9882
MFG
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
BODY STYLE: 7A STRAIGHT SHAPE, INTERNAL COUPLING
CONNECTOR LOCKING METHOD: INTERNALLY THREADED COUPLING RING
CONTACT POSITION ARRANGEMENT STYLE: ANAQ 28-9 SINGLE MATING END
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3406D28-9SW
III END ITEM IDENTIFICATION: RADAR, SEARCH, AN/SPS-48
INCLUDED CONTACT QUANTITY: 12 SINGLE MATING END ALL CONTACT GROUPINGS
INCLUDED CONTACT TYPE: ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS
INSERT POSITION IN DEG: 80.0
MANUFACTURERS CODE: 96906
MATING END QUANTITY: 1
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: MS3406
OVERALL DIAMETER: 1.969 INCHES MAXIMUM
OVERALL LENGTH: 2.125 INCHES MAXIMUM
POLARIZATION METHOD: KEYWAY OR MULTIPLE KEYWAY
SHELL MATERIAL: ALUMINUM ALLOY
SPEC/STD CONTROLLING DATA:
TERMINAL LOCATION: BACK SINGLE MATING END ALL CONTACT GROUPINGS
TERMINAL TYPE: CRIMP SINGLE MATING END ALL CONTACT GROUPINGS
Related Searches:
PE4654
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935015719903
NSN
5935-01-571-9903
PE4654
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935015719903
NSN
5935-01-571-9903
MFG
PASTERNACK ENTERPRISES INC.
Description
BODY STYLE: 7G STRAIGHT SHAPE THREADED
BUSHING ACCOMMODATION HOLE SHAPE: ROUND W/DOUBLE FLAT
CONTACT POSITION ARRANGEMENT STYLE: ABCE N SINGLE MATING END
CONTACT SURFACE TREATMENT: GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE: 0.900 INCHES NOMINAL
III PRECIOUS MATERIAL: GOLD
INCLUDED CONTACT QUANTITY: 1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: COAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 1
MOUNTING FACILITY THICKNESS: 0.300 INCHES MAXIMUM
OVERALL DIAMETER: 0.810 INCHES NOMINAL
OVERALL LENGTH: 1.200 INCHES NOMINAL
SHELL MATERIAL: STEEL CORROSION RESISTING
SHELL SURFACE TREATMENT: PASSIVATE
TERMINAL LOCATION: BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE: SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
Related Searches:
PE9146
ADAPTER,CONNECTOR
NSN, MFG P/N
5935015719912
NSN
5935-01-571-9912
MFG
PASTERNACK ENTERPRISES INC.
Description
BODY STYLE: 1N STRAIGHT SHAPE, EXTERNAL/INTERNAL COUPLING
CONNECTOR LOCKING METHOD: INTERNALLY THREADED COUPLING NUT AND EXTERNALLY THREADED SHELL
CONTACT POSITION ARRANGEMENT STYLE: ABDN SMA 1ST MATING END ABDQ SMC 2ND MATING END
CONTACT SURFACE TREATMENT: GOLD ALL MATING ENDS SINGLE CONTACT GROUPING
III PRECIOUS MATERIAL: GOLD
III PRECIOUS MATERIAL AND LOCATION: CONTACT PLATING GOLD
INCLUDED CONTACT QUANTITY: 1 ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE: COAXIAL PIN 1ST MATING END SINGLE CONTACT GROUPING COAXIAL SOCKET 2ND MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY: 2
OVERALL LENGTH: 0.640 INCHES NOMINAL
SHELL MATERIAL: COPPER ALLOY
SHELL SURFACE TREATMENT: NICKEL
Related Searches:
85054-60036
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935015720090
NSN
5935-01-572-0090
85054-60036
CONNECTOR,RECEPTACLE,ELECTRICAL
NSN, MFG P/N
5935015720090
NSN
5935-01-572-0090
MFG
AGILENT TECHNOLOGIES INC. DBA NORTH AMERICAN CONTACT CENTER DIV AGILENT BUSINESS CENTER
Description
III END ITEM IDENTIFICATION: 6625-01-497-7348, TEST STATION, ELECTRICAL-ELECTRONIC EQUIPMENT
III PART NAME ASSIGNED BY CONTROLLING AGENCY: SLIDING LOAD, TYPE-N, FEMALE
SPECIAL FEATURES: MEASUREMENT OF COMPONENTS WITH 50 OHM TYPE-N CONNECTORS;USED IN CONNECTION WITH CALIBRATION AND VERIFICATION OF NETWORK ANALYZERS
Related Searches:
390GS015NF1116H6
BACKSHELL,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935015720174
NSN
5935-01-572-0174
390GS015NF1116H6
BACKSHELL,ELECTRICAL CONNECTOR
NSN, MFG P/N
5935015720174
NSN
5935-01-572-0174
MFG
GLENAIR INC.
Description
CABLE OPENING DIAMETER: 0.625 INCHES MINIMUM AND 0.937 INCHES MAXIMUM
CABLE OPENING QUANTITY: 1
FEATURES PROVIDED: ELECTROMAGNETIC INTERFERENCE SHIELDING
MATERIAL: ALUMINUM ALLOY
MOUNTING FACILITY TYPE AND QUANTITY: 1 THREADED COUPLING AND 1 CLAMP ASSEMBLY
NOMINAL THREAD SIZE: 0.750 INCHES
OVERALL HEIGHT: 0.940 INCHES MAXIMUM
OVERALL LENGTH: 5.093 INCHES MAXIMUM
OVERALL WIDTH: 1.770 INCHES MAXIMUM
SEAL MATERIAL: RUBBER, SILICONE BASE
SEAL TYPE: PREFORMED PACKING
SIZE DESIGNATION: 11
SPECIAL FEATURES: HAS RFI SHIELDING AND IS OLIVE DRAB IN COLOR. SHELL FINISH IS 1000 HOUR CORROSION RESISTANT.
STYLE DESIGNATOR: 4C STRAIGHT TYPE W/CABLE CLAMP
SURFACE TREATMENT: CADMIUM AND NICKEL, ELECTROLESS
THREAD CLASS: 2B
THREAD DIRECTION: RIGHT-HAND
THREAD SERIES DESIGNATOR: UNEF
