My Quote Request
No products added yet
5306-00-150-9081
20 Products
83T6
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001509081
NSN
5306-00-150-9081
MFG
DEPARTMENT OF THE AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN173H6
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: B6812
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD LENGTH: 0.374 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
Related Searches:
VAL23611-6D026
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504890
NSN
5306-00-150-4890
MFG
VALLEY-TODECO INC.
Description
FASTENER LENGTH: 2.009 INCHES MINIMUM AND 2.056 INCHES MAXIMUM
GRIP DIAMETER: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.625 INCHES NOMINAL
HEAD HEIGHT: 0.210 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.384 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
Related Searches:
VS2978A06U026
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504890
NSN
5306-00-150-4890
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
FASTENER LENGTH: 2.009 INCHES MINIMUM AND 2.056 INCHES MAXIMUM
GRIP DIAMETER: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.625 INCHES NOMINAL
HEAD HEIGHT: 0.210 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.384 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
Related Searches:
VS2978A06U026
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504890
NSN
5306-00-150-4890
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
FASTENER LENGTH: 2.009 INCHES MINIMUM AND 2.056 INCHES MAXIMUM
GRIP DIAMETER: 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH: 1.625 INCHES NOMINAL
HEAD HEIGHT: 0.210 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.375 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.384 INCHES MINIMUM AND 0.431 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
Related Searches:
11797A05U011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
REID PRODUCTS INC.
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
68484-5A11
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE FASTENERS GROUP DIV AEROSPACE - SANTA ANA
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
68484-5A11
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
SPS TECHNOLOGIES LLC DBA AEROSPACE DIVISION DIV AEROSPACE PRODUCTS
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
AIC2263A05U011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
SPS TECHNOLOGIES LLC DBA AIR INDUSTRIES
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
BM3200-5A011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
HUCK INTERNATIONAL INC . DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
BM3200-5A011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
HUCK INTL INC
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
PBF1041A5U011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
PAUL R. BRILES INC. DBA PB FASTENERS
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
STSBG000A05U011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
VAL23611-5D011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
VALLEY-TODECO INC.
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
VS2978A05U011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
VS2978A05U011
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001504931
NSN
5306-00-150-4931
MFG
ALCOA GLOBAL FASTENERS INC. DBA ALCOA FASTENING SYSTEMS DIV TORRANCE OPERATIONS
Description
EXTENDED WASHER THICKNESS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
FASTENER LENGTH: 1.022 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 0.687 INCHES NOMINAL
HEAD HEIGHT: 0.187 INCHES NOMINAL
HEAD STYLE: C8 DOUBLE HEXAGON
MATERIAL: STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: H-11,STS BS000,FSCM 98897 MFR REF SINGLE MATERIAL RESPONSE OVERALL
MINIMUM TENSILE STRENGTH: 132000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE FINISH: 32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0 MICROINCHES GRIP
SURFACE TREATMENT: NICKEL AND CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: STS BS 000,LOCKHEED-GEORGIA CO MFR REF ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.335 INCHES MINIMUM AND 0.382 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
3278918
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001508119
NSN
5306-00-150-8119
MFG
RAYTHEON COMPANY
Description
DESIGN CONTROL REFERENCE: 3278918
FASTENER LENGTH: 3.969 INCHES NOMINAL
GRIP DIAMETER: 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH: 3.069 INCHES NOMINAL
HEAD HEIGHT: 0.157 INCHES MINIMUM AND 0.171 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E4 HEXAGON CORNERS
HOLE DIAMETER: 0.070 INCHES NOMINAL
HOLE QUANTITY: 3
HOLE TYPE: DRILLED
MANUFACTURERS CODE: 82577
MATERIAL: STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 6150 OR STEEL COMP 8735 OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.312 INCHES
SURFACE TREATMENT: CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416 TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.900 INCHES MINIMUM
THREAD QUANTITY PER INCH: 24
THREAD SERIES DESIGNATOR: UNJF
WIDTH BETWEEN FLATS: 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
Related Searches:
12B7364-9
BOLT,SHOULDER
NSN, MFG P/N
5306001508134
NSN
5306-00-150-8134
MFG
LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV LOCKHEED MARTIN AERONAUTICS COMPANY
Description
DESIGN CONTROL REFERENCE: 12B7364-9
FASTENER LENGTH: 1.020 INCHES NOMINAL
HEAD HEIGHT: 0.110 INCHES NOMINAL
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.051 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MANUFACTURERS CODE: 81755
MATERIAL DOCUMENT AND CLASSIFICATION: FMS-0131 FSCM 81755 MFR REF SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER: 0.250 INCHES
SHOULDER DIAMETER: 0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH: 0.725 INCHES NOMINAL FIRST SHOULDER
SHOULDER SHAPE: ROUND FIRST SHOULDER
SURFACE TREATMENT: PASSIVATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THE MANUFACTURERS DATA:
THREAD CLASS: 2A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.295 INCHES MAXIMUM
THREAD QUANTITY PER INCH: 20
THREAD SERIES DESIGNATOR: UNC
WIDTH BETWEEN FLATS: 0.375 INCHES NOMINAL
Related Searches:
AN173H5
BOLT,MACHINE
NSN, MFG P/N
5306001509080
NSN
5306-00-150-9080
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN173H5
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER: 0.516 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH: 0.656 INCHES NOMINAL
FEATURES PROVIDED: FINISHED HEAD
GRIP LENGTH: 0.250 INCHES NOMINAL
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
HEAD STYLE: C1 HEXAGON
HOLE CONFIGURATION STYLE: E6 HEXAGON FLATS
HOLE DIAMETER: 0.046 INCHES NOMINAL
HOLE QUANTITY: 1
HOLE TYPE: DRILLED
MANUFACTURERS CODE: 88044
MATERIAL: STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 8740 OR STEEL COMP 4140 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-B-6812 MIL SPEC ALL MATERIAL RESPONSES OVERALL
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER: 0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES NOMINAL FIRST HOLE
SPEC/STD CONTROLLING DATA:
SURFACE FINISH: 63.0 MICROINCHES BEARING SURFACE OF HEAD 63.0 MICROINCHES GRIP
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY2,CL3 FED SPEC ALL TREATMENT RESPONSES OVERALL
THREAD CLASS: 3A
THREAD DIRECTION: RIGHT-HAND
THREAD LENGTH: 0.406 INCHES MINIMUM
THREAD QUANTITY PER INCH: 32
THREAD SERIES DESIGNATOR: UNF
WIDTH BETWEEN FLATS: 0.365 INCHES MINIMUM AND 0.377 INCHES MAXIMUM
Related Searches:
AN173H6
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001509081
NSN
5306-00-150-9081
MFG
AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN173H6
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: B6812
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD LENGTH: 0.374 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
Related Searches:
B6812
BOLT,CLOSE TOLERANCE
NSN, MFG P/N
5306001509081
NSN
5306-00-150-9081
MFG
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
Description
DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: AN173H6
FASTENER LENGTH: 0.765 INCHES MINIMUM AND 0.812 INCHES MAXIMUM
HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM
MANUFACTURERS CODE: 81349
MANUFACTURERS CODE: 88044
MINIMUM TENSILE STRENGTH: 125000 POUNDS PER SQUARE INCH
NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE: B6812
SHANK UNTHREADED HOLE DIAMETER: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPEC/STD CONTROLLING DATA:
THREAD CLASS: 3A
THREAD LENGTH: 0.374 INCHES MINIMUM AND 0.453 INCHES MAXIMUM
